62 Vital Signs Simulator Oximeter SpO2 Optical Emitter and Detector To change the transmission value: 1. From the SpO2 screen, push or to highlight the Transmission value. 2. Push . 3. Push or to highlight Dark, Thick Finger, Medium Finger, Light, Thin Finger, ...
I have 2000 Volvo s40 1.9t when I add coolant to expansion reservoir it comes up in one of the spark plugs Wells I started the car once after it stalled with starting fluid I drove it’s lil but it ran really bad I’m sure its blown head gasket due to the fact I noticed a lil ...
The system was implemented using 40 sensor nodes, 4 distribution points and one gateway covering a hospital area of approximately 2500 m2. The system was tested and the measured percentage of lost packets is found to be less than 3.3% of those sent. During transmission, the current measured ...
Limp mode, also known as "limp-home mode," activates when your engine control unit (ECU) or transmission control unit (TCU) detects a problem with your car. The purpose of limp mode is to give your car just enough power so that you can drive to a nearby mechanic or get your car hom...