The real throughput will be about 40-60% of this rate. If you only see 54 there, please output the full result of the previous command. For 802.11n to be usable, make sure you use WPA2 with AES (no TKIP, no WPA1) or Open. Also make sure that WMM is allowed on the...
by the famous author of Chariots of the Gods In the exb'etemeetrlel orlds he has made his own domaln. strengthen van b am.ken's well-known theory that the earth wes vislted thousands of yean ego by astm- nauts from another planet who oonveyed Information that enabled men to develop...
Are the wireless clients confirmed to be on 5.0 Ghz? 0 Helpful Reply Rich R VIP 04-07-2022 06:56 AM Well that is VERY old software ... Presume you have all the MCS rates enabled? https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_...
For 802.11a/n/ac I have channels 36-64 enabled, but the check boxes for channels 100-124 are not marked. This would seem to be the correct setting as far as I can tell. 0 Helpful Reply Leo Laohoo Hall of Fame In response to IanMurphy 04-06-2022 04:20 AM -...