For concrete exposed to hydrogen sulfide gases and chemicals, Protech used a multi-layer coating system. The system was comprised of a primer; Sher-Glass FF, a glass flake reinforced epoxy, as a mid-coat; and a urethane topcoat for visible areas. For general piping not exposed to gases...
PLEASE NOTE: Exterior applications are not recommended for Epoxy or Hybrid products. OEM specified and approved finishes are available. Please contact your Sherwin-Williams Representative for details. Due to the printing process, colors shown approximate as closely as possible to the actual paint colors...
To coat the concrete, the Cor-Ray Painting crew first applied Sherwin-Williams Steel-Seam FT910 Epoxy Patching and Surfacing Compound by trowel as needed to fill larger surface voids. Crew members then primed concrete surfaces by spray-applying Corobond 100 Epoxy Primer/Sealer from Sherwin-Williams...
the crew applied Poly-Glass™ Putty resurfacing compound from Sherwin-Williams to fill in any voids and bugholes in the concrete surface before applying two coats of Sherwin-Williams Cor-Cote VEN GF to protect the containment area. Specifiers chose this graphite-filled epoxy novolac-based vinyl ...