3.set_wire_load_mode a. 这个命令的三种设置:TOP/ENCLOSED/SEGMENTED; b.TOP:在设置为TOP时,内部所有的子模块或者子系统都将会使用TOP层所设置的线负债模型,因此会覆盖所有的子模块的设置值。 c.ENCLOSED:该模式下,会默认选择能够cover整个net路径层次的线负载模型,并不一定是TOP层; d.SEGMENTED:设置为该参数...
set _ wire _ load _ min _ block _ sizeTypes, Data
逻辑综合阶段连线负载模式(set_wire_load_mode)共有 3 种,enclosed)、top以及 。 暂无答案
aThe minimum breaking strength of the Ground wire tension set shall be not less than 95% of the ultimate breaking strength of the Ground wire and its minimum slipping load shall be not less than 50% of the ultimate breaking strength of the Ground wire. 接地导线紧张集合的极小的抗断强度少于...
If I go to INIT A and select IRS INIT it is showing me in the Northern hemisphere instead of the southern [BUG]I'm using the stable version. I'm trying to load a flightplan into the MCDU and it wont let me select the departure airport so I cant set my runway or STAR. If I go...
set _ wire _ load _ selection _ groupCommands, Physical Implementation
The generator set load output wire connection terminal comprises an insulating plate and conducting rods. The insulating plate comprises an insulating plate body, conducting rod connection seats and installation holes. The insulating plate body, the conducting rod connection seats and the installation ...
The generator set load output wire connection box protective cover comprises a panel and side plates. Each side plate is provided with an installation portion. The side plates are rotatably fixed on the left sidewall and the right sidewall of the inner side of the wire connection box. The ...
The moving contact of a self-holding change-over contact set of monitoring relay is connected by a by-pass wire to the junction point between the supply line and the last load. The self-holding change-over contact connects in its rest position the by-pass wire (V1, V2) to the junction...
The moving contact of a self-holding change-over contact set of monitoring relay is connected by a by-pass wire to the junction point between the supply line and the last load. The self-holding change-over contact connects in its rest position the by-pass wire (V1, V2) to the junction...