DNS Server = 8.8.8.8 and 8.8.4.4 On Ubuntu server, in order to set static IP address we need to add IP configuration to the /etc/network/interfaces file. So open the /etc/network/interfaces file using a command line text editor (You can use vim or nano on Ubuntu Server). vim /etc...
It is really important to know how to configure static IP Address on Ubuntu Server, Because it is almost impossible to run a server without a static IP Address. During the installation, Ubuntu Server by default configured to use dynamic IP Address. In this Tutorial we are going to learn how...
iface eth0 inet dhcp up route add 192.168.11.2 dev eth0 up route add default gw 192.168.11.2 dev eth0 auto eth1 iface eth1 inet static address 10.95.163.14 netmask 255.255.255.0 up route add 172.16.0.0/16 via 10.95.163.1 dev eth1 problem sudo /etc/init.d/networking restart RTNETLINK an...
The following is a sample Ubuntu network interface configuration file with permanent static route entries. network: ethernets: ens33: dhcp4: false addresses: [192.168.1.10/24] routes: - to: default via: 192.168.1.1 - to: 10.0.0.0/24 via: 192.168.1.100 metric: 100 nameservers: addresses: [...
On Ubuntu server, in order to set static IP address we need to add IP configuration to the /etc/network/interfaces file.So open the /etc/network/interfaces file using a command line text editor (You can use vim or nano on Ubuntu Server). ...
Ubuntu :: Unable To Access Samba Share By Hostname / Resolve This? Apr 30, 2010 I got my server set up with 10.04, and with everything installed: DHCP, SSH, Samba, VBox, etc.DHCP, SSH work fine, but I am having problems where I cannot ping the hostname of the machin...
On Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains...
One Ubuntu 20.04 server with a sudo non-root user and a firewall enabled. To set this up, you can follow ourInitial Server Setup with Ubuntu 20.04tutorial. We will refer to this as theOpenVPN Serverthroughout this guide. A separate Ubuntu 20.04 server set up as a...
This tutorial will be showing you how to set up and run your own authoritative name server on Ubuntu with the widely-used BIND 9 software.
When prompted for the first DHCP address, accept the default value. Do the same for the last DHCP address, as well as the maximum number of DHCP clients. SelectYeswhen asked to NAT the IPv4 traffic. When asked to configure an IPv6 subnet, selectNo. You’ll see the following output once...