3.4 clock group约束优先级 一、背景 正常情况下FPGA设计中,内部路径通常需要时钟周期约束(create_clock)和时钟组约束(set_clock_groups),但对于一些特殊场景则需要时序例外约束,set_max_dealy和set_max_delay就是四大时序例外约束中的两个。 二、Max/Min_delay约束 在设计中,有时需要限定路径的最大时延和最小时延...
set_max_delay 1 -from reg1/CP -to reg2/D 2) set_max_delay命令会遇到问题 因为对于max delay的设定,通常用于异步时钟之间的检查,因此在进行设置时候可能会遇到问题,举例如下: set_clock_group -asynchronous -group {clk1 clk3} -group {clk2} 如上所示,clk1和clk3为同步时钟组,clk2和clk1/clk3...
时序约束简单,进行时序例外约束,只需要 set_clock_groups 将读写时钟约束为异步时钟组即可,简单高效。 代码语言:javascript 复制 set_property-asynchronous-group[get_clocks write_clock]\-group[get_clocks read_clock] (2)自己写外部控制逻辑的FIFO 格雷码做异步 FIFO 的跨时钟域处理,计数器和读写控制逻辑在 BRA...
We are currently having a discussion in my company on whether to use set_clock_groups -asynchronous or set_max_delay/set_min_delay for constraining
总线偏斜约束不属于时序例外,和set_data_check一样,它属于时序断言。因此,总线偏斜约束不会被时序例外约束,如set_clock_group,set_false_path,set_max_delay,set_multicycle_path约束影响,仅可能会被route_design优化掉。 约束设置时建议将总线偏斜约束到没有扇出fanout的路径上,并且,每个总线偏斜约束必须覆盖最少两...
set_clock_groups -name async_RXETH_TXETH -asynchronous -group [get_clocks -include_generated_...
set max_delay 10ns -from [get_clocks clock1] -to [get_clocks clock2] Or does the asynchronous group command cut all analysis of those paths? \c Translate 0 Kudos Copy link Reply Altera_Forum Honored Contributor II 09-30-2009 03:23 PM 2,745 Views The asynchronous command...
我们要想明白题意就要明白set_clock_groups -async -group {CLK1CLK3}{CLK2}这句约束的意思,set_clock_groups是设置禁用识别的时钟组之间的时序分析命令;-async用于指定时钟之间的异步关系,让时序分析工具忽略异步时钟之间的路径;-group后面紧跟指定要忽略时钟之间路径的异步时钟的名字。因为图中CLK1、CLK2、CLK3...
Theset_max_delay,set_min_delay, andset_multicycle_pathconstraints do not affect theset_max_skewtiming constraint. However, theset_clock_groupsconstraint does impact theset_max_skewconstraint. Note:Exclusive clock groups (set withset_clock_group -exclusive) overrideset_max_skewconstraints. ...
First of all, it overrides the async FIFO's max_delay exception and makes these FIFOs nondeterministic. I'm interested in is there any real-world use-case (design with both low and high-level interfaces), where set_clock_groups should be used? The precedence of the set_clock_groups...