10.2 0 destination-port eq 21 rule 25 permit tcp source 10.85.100.15 0 source-port eq 22 destination 10.85. 10.2 0 destination-port eq 21 # Run the display current-configuration | include traffic-redirect command on the switch. The command output shows that the service chain configurations ...
TCP/IP protocols operate at a lower level than the application protocols. The TCP/IP suite of protocols includes TCP, User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP). Port: It's the network port that the system service listens on for incoming network traffic....
This section provides the default settings for IP performance. Table 7-1 describes the default settings for IP performance. Table 7-1 Default settings for IP performance Parameter Default Setting Source IP address verification Disabled IP packet fragmentation on outbound interface Disabled Fa...
指向istio-ingressgateway的podistio:ingressgatewayservers:# 定义对外暴露的入口点,主要配置哪些host和端口允许访问-port:number:80name:httpprotocol:HTTPhosts:-"*"---# 由于在网关只定义入口点不定义具体的路由,所以我们需要定义虚拟服务来配置路由规则apiVersion...
{$_.ResourceGroupName –eq$RGname-and$_.ResourceType-eq"Microsoft.Network/loadBalancers"}$slb=Get-AzLoadBalancer-Name$resource.Name-ResourceGroupName$RGname# Add a new probe configuration to the load balancer$slb|Add-AzLoadBalancerProbeConfig-Name$probename-ProtocolTcp-Port$port-Interva...
Port Settings – Trust Mode and Traffic Class Ethernet and port channel interfaces support three QoS trust modes: CoS Trust: Ports use inbound packet CoS field contents to derive the traffic class. DSCP Trust: Ports use inbound packets DSCP field contents to derive the traffic class. Untru...
access-list 102 permit udp any any range 16384 32767 access-list 103 permit tcp any eq 1720 any access-list 103 permit tcp any any eq 1720 ! voice-port 1/0/0 ! voice-port 1/0/1 ! voice-port 1/1/0 ! voice-port 1/1/1 ! dial-peer cor custom ! dial-peer voice 1 pots ...
config rule option name 'DNS' list proto 'tcp' list proto 'udp' list dest_port '53' list dest_port '853' list dest_port '5353' option class 'cs5' option counter '0' The OpenWrt firewall syntax is outlined herehttps://openwrt.org/docs/guide-user/firewall/firewall_configuration ...
ciscoasa(config-cmap)# match port tcp eq 22 ciscoasa(config-cmap)# exit Eine Richtlinienzuweisung für die Priorisierung von Sprach- und SSH-Datenverkehr: ciscoasa(config)# policy-map p1_priority ciscoasa(config-pmap)# class Voice ciscoasa(config-pmap-c)# priority ciscoasa(config-...
Since IRC operates on port 6667, we should select the Port checkbox, select EQ in the Options box, and type 6667 in the Port box. Finally, since we want to all users, we should select All in the Source box, and then, optionally, select Destination and choose All. The reason that ...