The exposure time for each sample was kept at 0.1 s for each appropriate wavelength for different dyes. 4.2.4. The Preparation Time of Each Step of the Clinical Test Sample Figure 6 shows the experiment process flow of all clinical samples. It took about 25 min to separate the PBMC from ...
Materials and Samples Preparation The substrate was 5083 Al alloy. The panel was cut into 120 mm × 50 mm × 5 mm specimen, then the surface was sand blasted to Sa 2.5, cleaned with ethanol and acetone, and finally dried sufficiently in the air before the coating was applied. The ...
Sample Preparation The microcapsule-containing asphalt was prepared using a high-speed shearing ma- chine. The asphalt was heated in the oven to a flowable state and then poured into a stainless-steel basin, which was placed on a preheated electric stove to maintain the temper- ature of the...
The Control Design To have a fair comparison between the considered SCC and the VCC, a common control strategy based on a closed-loop PI position controller in combination with a velocity feedforward and a pressure Afecetudabtoarsck20i1s9,i8m, xpFleOmR ePnEEteRdRaEcVcIoEWrding to Figure 5...