6. It is noteworthy that small landforms appear on the predicted rasters that are not visible on the geomorphological map. This may be due to the higher spatial resolution of the geomorphometric variables compared to the reference map (not necessarily the prediction errors). Table 3 Performance ...
The measurement of power or energy at a distant point from the transmitter, with no guarantee that the measuring probe receives the whole laser beam, does not say anything about the actual energy or power of the emitter. The value measured in this case is a complex function of propagation ...
Thereafter, the image is divided into a raster of cells or sub-portions at a resolution which is usually significantly lower than its native pixel resolution, so that each cell or sub-portion comprises many image pixels. The raster may typically be a 10 by 10 grid of cells. Next, an ...
Due to good mechanical properties, especially very good tensile strength, raster angles of 0° and 45° are often used. The 0° fiber orientation angle allows for the highest strength (fiber orientation in the direction of the applied forces), up to 25% higher compared to the 90° orientatio...
The classified raster data were converted into vector data with the Raster to Polygon tool in ArcGIS Pro (ESRI) in order to enable a comparison of the collected environmental and social data with the light pollution emission rasters. The polygons obtained for each light pollution class were adde...