我看这个网页讲的不是很详细:http://processors.wiki.ti.com/index.php/OMAP-L138_Preparing_SD_Card_for_Boot#CCS,CCS调用SDMMCWriter_DSP.pjt To flash a single AIS image, open SDMMCWriter_ARM.pjt (or DSP) located in the "OMAP-L138\CCS\SDMMCWriter\" directory of the serial flashing tools....
Please choose the flashing tool according to your host PC OS: Flash the Raw Firmware GUI: SDCard Installer (Linux/Windows/Mac) Etcher (Linux/Windows/Mac) SD Firmware Tool (Windows) CLI: dd (Linux) Flash the RK Firmware GUI: SD Firmware Tool (Windows) CLI: dd (Linux) SDCard Instal...
For setting up the microSD card, you’ll need to download the latest SD card image and then write it using an Image Flashing tool. Download theKria KR260 Robotics Starter Kit Imageand save it on your computer. Download theBalena Etcher(recommended; available for Window, Linux, and macOS)....
我使用Appro的DM368 IPNC,由于板子没有拉出串口启动开关,而且CCS烧写的效率又太低,所以我尝试使用SD卡烧写uboot和ubl文件,然后再从nand启动。 我参考了TI Wiki上的SD card boot and flashing tool for DM355 and DM365来制作启动的SD卡,这些过程都还算顺利。 我把SD卡插入板子,并从SD卡启动...
Hi, The problem is really bored me. I write the boot data into sd card as the wiki link http://wiki.davincidsp.com/index.php/SD_card_boot_and_flashing_tool_for_DM355_and_DM365
1. After the flashing using MFGTool, when I checked the SD card , the card is empty. Is the tool flashing the boot_image.sb to the raw partition of the SD card ? 2. We could probed the SD clock during MFGTOOL flashing, but no data line pulses are being generated. But...
Command line script to flash SD card images of any kind. Note that for some devices (e.g. Raspberry Pi), at the end of the flashing process the tool tries to customize the SD card e.g. it configures a hostname or WiFi. And with a cloud-init enabled image you can do much more ...
For setting up the microSD card, you’ll need to download the latest SD card image and then write it using an Image Flashing tool.Download the Kria™ KV260 Vision AI Starter Kit Image and save it on your computer. Download the Balena Etcher (recommended; available for Window, Linux, ...
Writing Image to SD Card Quick and Easy Way You can usebalenaEtcher, a friendly cross platform tool for flashing images to SD cards. Download and install balenaEtcher Connect an SD card reader with the SD card inside Open balenaEtcher and select the Porg.imgfile to write to the SD card ...
Before proceeding with the flash of the SD card, you should unmount it first. To do that, launch theDisk Utilitytool and unmount the SD Card. Do NOT eject it, simply unmount it with a right-click. Alternatively, you can also unmount the disk manually, by typing the following in the te...