将此配置保存到 nvram 并退出 翻译结果4复制译文编辑译文朗读译文返回顶部 保存了此配置到NVRAM和出口 翻译结果5复制译文编辑译文朗读译文返回顶部 保存这种配置对nvram并且退出 相关内容 aI love the most is how you have the heart to hurt you 正在翻译,请等待...[translate] ...
这个配置保存到NVRAM和退出。 翻译结果2复制译文编辑译文朗读译文返回顶部 这个配置保存到NVRAM和退出。 翻译结果3复制译文编辑译文朗读译文返回顶部 将此配置保存到 nvram 并退出。 翻译结果4复制译文编辑译文朗读译文返回顶部 保存了此配置到NVRAM和退出。
[translate] a[2] Save this configuration to nvram and exit. (2)保存这种配置对nvram并且退出。[translate]
The Config menu allows you to save and restore: NVRAM, Startup Config and Running Config If you’ve done the “Set up TCP/IP networks” course, you will have used this menu, because it also gives you a very intuitive way of configuring network devices. It’s like a configuration assis...
In this tutorial, I would explain a different method to backup configuration: the archive command. Introduced into Cisco IOS Release 12.3(4)T, the archive command permits tosave a copy of the current runningconfiguration to different path: ftp, http, https, rcp, scp, tftp servers. Moreover ...
4.-When i finish I must to check one of this items, I choose 2 [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config. [2] Save this configuration to nvram and exit. 5.-I check the config runing-config and starup-...
TG789pvn save唔到nvram config解決方法:從http://192.168.8.1登入user:user, 改好wireless SSID, ...
The NVRAM Save/Restore Utility scripts must be run from the command line in the project directory. At the SSH prompt, enterls /mntto see the names of the partition labels on the USB stick (e.g. ASUS). Change to the project directory using the change directory command (e.g.cd /mnt/...
Press RETURN to get started! *Mar 1 00:00:06.523: %ATA-6-DEV_FOUND: device 0x1F0 *Mar 1 00:00:08.055: %NVRAM-5-CONFIG_NVRAM_READ_OK: NVRAM configuration 'flash:/nvram' was read from disk. *Jan 12 10:12:08.224: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan ...
but from Operative system (Os) perspective, things are different: CPU time including but not limit to: 1.1 interrupt / exception time, T_int 1.2 system time: context switch and other system time, T_sys 1.3 Task time: application time: T_efftive ...