the TV that you aim the remote at. In normal use, the red standby light is on when the TV is off (indicating the TV is on standby), and the red standby light is off when the TV is in use (or doesn't have power). If you are using a monitor, the standby light will be blue...
FAQ for Samsung TV, Find more about how to troubleshoot the Samsung TV that will not turn on with Samsung Support.
If not I suggest you power off the Tv and unplug at the wall for 30 seconds before trying again, see if that provides a solution. is the problem on all sources, If still no if issue with external connections have you tried different ports ,you may need to try different HDMI cables som...
The first and the most important stage of repair work is tofind out why the Samsung TV does not turn on and the diagnostic results will showthe cause of the failure. Depending on the complexity of the malfunction, you need to fix it yourself or contact a specialist. Below is a list of...
Unplug the TV from the outlet and then plug it back in. Try a different outlet. If the TV is plugged into a surge protector, unplug it from thesurge protector and plug it directly into the wall outlet. If you have tried all of the above and the TV still will not turn on, the TV...
Here’s how to fix your Samsung TV not turning on, and why it won’t turn on even after the standby light blinks for some time: If Samsung TV isn’t turning on, perform a soft reset on it. Unplug the TV from the power socket and wait for at least 60 seconds. Press and hold th...
Like computers, TVs also have motherboards. If your TV’s main board develops a fault, it might turn on and off without anyone clicking a button. Reason #10: Missing TV remote. This seems like something that will never happen to an adult. Nonetheless, you sometimes get so busy that your...
https://www.samsung.com/us/support/troubleshooting/TSG01001086/#tv-s-red-standby-light-is-on Once these steps are completed, if the unit is still not powering on properly, the unit will require service. There are a couple of options here we can take based on your warranty status. If ...
Approximately half the time the TV will not display a picture when it is turn on using the remote. I can see the TV responding to the remote, but no picture, no channels, no content. To get the TV to work, I have to unplug it, wait a few seconds ...
@myth9 based on the voltages coming from your power board it appears as it is your main board that is not turning the TV on. Remember that it is the main board that tell the power board to turn on. Disconnect the mail board from the power board and try to turn it on. See if you...