For example, the multi-effect evaporator will have the problem of scaling at the salt discharge foot during the salt making process. The main reason is that the washing water is introduced into the salt discharge foot of the evaporation tank, and the solution at the salt discharge foot has ...
As explained in Section 3.1 for the fuel circuit, an expansion tank was provided to avoid the strong pressure variations related to temperature transients of an incompressible liquid in closed loop and to establish a reference pressure level in the cold leg (1 bar). The expansion tank was ...
We left the seeds for 2 days in the dark on a sheet of 0.5 mM CaSO4 germination paper, after which we selected seeds that had germinated at the same growth rate and trans- ferred them to a hydroponic tank with a length, width and height of 55 cm × 42 cm ×...
In light of the axisymmetric characteristics of the tank foundation’s geometry, load distribution, and temperature distribution, a two-dimensional axisymmetric approach has been adopted to construct the geometric model. This methodology effectively transforms the intricate three-dimensional problem into a ...
A water pump and the connected water pipe were used to inject water into the tank, and the pump rate was controlled through the inlet and outlet valves and the frequency converter. The water flow rate was measured with a flowmeter. The switching between direct and reverse circulation was ...