Switched redundant configuration: The FMs/CPs can be connected in duplicate to separate ET 200Ms or one switched ET 200M. Two-channel redundant configuration: FMs/CPs can be plugged into both subunits or into expansion units connected to the subunits (see one-sided configuration). The redundancy...
8、f used DP-slavesSLAVE_DISTANCE:=1/DB_AB_NO :=DB13/Configuration of IM 153-3 interfaceSend DB for non redundant data from Station A to BDB_A_B_NO_LEN :=W#16#0/DB_B_A_NO :=DB13 /Amount of used data bytes within Send DBReceive DB for non redundant data from Station B to ...
下面的两个表格分别说明了采用S7-300,S7-400进行软件冗余时,可采用的不同网络连接以及所需调用的程序功能块包。 表3 从以上的表格中可以看到,软冗余系统当中可以采用MPI、PROFIBUS、Ethernet三种网络实现主系统和备用系统之间的数据同步(Redundant-backup link)。 采用BSEND_400包中的功能块进行数据同步时,无论数据同...
Switched redundant configuration: The FMs/CPs can be connected in duplicate to separate ET 200Ms or one switched ET 200M. Two-channel redundant configuration: FMs/CPs can be plugged into both subunits or into expansion units connected to the subunits (see one-sided configuration). The redundancy...
在软冗余系统进行工作时,A、B控制系统(处理器,通讯、I/O)独立运行,由主系统的PLC掌握对ET200从站中的I/O控制权。A、B系统中的PLC程序由非冗余(non-duplicated)用户程序段和冗余(redundant backup)用户程序段组成,主系统PLC执行全部的用户程序,备用系统PLC只执行非冗余用户程序段,而跳过冗余用户程序段。
这时本机已经同 s7400h 一样,作为一个站点,挂在同一个以太网上。第五步,在 wincc 的 industrial ethernet 中,建立新的连接,在其属性中输入 master cpu 的 mac 地址。进入画面编辑器,在右侧工具栏的动态向导中,选择 create redundant connection,一路下一步,在”动态化需要附加参数中”,main connection 中的...
SLAVE_DISTANCE :=1 // Configuration of IM 153-3 interface DB_A_B_NO :=DB13 // Send DB for non redundant data from Station A to B DB_A_B_NO_LEN :=W#16#0 // Amount of used data bytes within Send DB DB_B_A_NO :=DB13 // Receive DB for non redundant data from Station B ...
10、右击Configuration,选择新增一个冗余对象“Add REDUNDANT_DEVICE Object” 11、如下图在 中选择主设备PLC名称、冗余设备PLC名称,Ping Item选择PLC中使用到的一个变量名或地址即可。如下图所示: 注意事项:与西门子以太网通讯,Intouch变量地址格式需以“,”代替“.”具体如下: PLC地址 Intouch地址格式 DB30.DBX...
10、右击Configuration,选择新增一个冗余对象“Add REDUNDANT_DEVICE Object” 11、如下图在 中选择主设备PLC名称、冗余设备PLC名称,Ping Item选择PLC中使用到的一个变量名或地址即可。如下图所示: 注意事项:与西门子以太网通讯,Intouch变量地址格式需以“,”代替“.”具体如下: PLC地址 Intouch地址格式 DB30.DBX...
10、右击Configuration,选择新增一个冗余对象“AddREDUNDANT_DEVICEObject” 11、如下图在中选择主设备PLC名称、冗余设备PLC 下载文档 收藏 分享赏 0 内容提供方:135***5928 审核时间:2024-01-10 审核编号:8125024041006024 认证类型:实名认证 能力类型:内容提供者 领域...