RX packets:接收的总包数 RX bytes:接收的字节数 RX errors:表示总的收包的错误数量 RX dropped:数据包已经进入了 Ring Buffer,但是由于其它原因导致的丢包 RX overruns:表示了 fifo 的 overruns,这是由于 Ring Buffer不足导致的丢包 3)伪文件系统/proc Linux 内核提供了 /proc 伪文件系统,通过/proc可以查看内核...
structrte_eth_stats*stats);// rte_eth_stats 结构体(dpdk-stable-19.11.3/lib/librte_ethdev/rte_ethdev.h)structrte_eth_stats{uint64_tipackets;/**< Total number of successfully received packets. */uint64_topackets;/**< Total number of successfully transmitted packets....
rx_packets: 18198913247 tx_packets: 13051235581 rx_bytes: 10555544090204 tx_bytes: 2367746549153 rx_errors: 0 tx_errors: 0 rx_dropped: 92572379 tx_dropped: 0 Please let me know. Thanks. Regards, CC97 Translate 0 Kudos Reply All forum topics Previous topic Next topic 7 Replies Sazirah...
The output of ethtool -S shows rx_drops packets while ifconfig or ip -d link output report zero packets dropped: Raw # ethtool -S eno2 | grep rx_drops [0]: rx_drops: 2236879 [1]: rx_drops: 0 [2]: rx_drops: 0 [3]: rx_drops: 0 [4]: rx_drops: 0 [5]: rx_drops: 0...
FOR GRE packet, rx_dropped counters increase intermittently. and when the dropped happen, the cpu, queue buffer and interrupt works well and is not overload. besides this issue not happened to general IP packet. Translate0 Kudos Reply
received packets. */uint64_topackets;/**< Total number of successfully transmitted packets.*/uint64_tibytes;/**< Total number of successfully received bytes. */uint64_tobytes;/**< Total number of successfully transmitted bytes. */uint64_timissed;/**< Total of RX packets dropped by the ...
[...] 2: eno2: mtu 1500 qdisc mq master bond0 state UP mode DEFAULT qlen 1000 link/ether 00:10:e0:aa:aa:aa brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 721996160 6510912 0 0 0 2924787 TX: bytes packets errors dropped carrier collsns 23776605 199095 0 0...
00:0C:29:02:27:33 inet addr:192.168.71.136 Bcast:192.168.71.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe02:2733/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1555 errors:0 dropped:0 overruns:0 frame.:0 TX packets:26 errors:0 dropped:0 overruns:0...
But if we increase this socket size to more, say 5000 we start getting RX errors or dropped packets (and throughput gets increased to ~300 Mbps). Any idea why? On wand board it is working fine & on our board we saw this issue. Baseline uboot/kernel is taken from wandboard and in ...
packets.*/uint64_t opackets;/**< Total number of successfully transmitted packets.*/uint64_t ibytes;/**< Total number of successfully received bytes.*/uint64_t obytes;/**< Total number of successfully transmitted bytes.*/uint64_t imissed;/**< Total of RX packets dropped by the HW,...