Beacon间隔:配置无线2.4G射频发送Beacon帧的间隔 RTS阈值:RTS阈值是为了防止在AP范围内却不在同一范围内的无线终端同时发送数据导致冲突所用,当站点要发数据时,站点将发一个RTS到AP,通知AP它将发送数据。当收到申请后,AP通过CTS通知它覆盖区内的所有其它站点,要求它们推迟发送。当threshold值设置成0时,AP总是发...
RTS Threadshold 如果802.11 网卡的驱动程序支持,用户可通过调整 RTS阈值 (RTS threshold) 来控制RTS/CTS 交换过程。只要大于此阈值,RTS/CTS 交换过程就会进行,小于此阈值则会直接传送帧。此阈值一般应该设定为2347 byte ,如果网络吞吐相当低或重传比例偏高,可以降低 RTS 阈值值以启动 RTS 清空机制。 Fragmentation T...
For access points, you enable RTS/CTS by setting a specific packet size threshold (0 — 2347 bytes) in the user configuration interface. If the packet that the access point is transmitting is larger than the threshold, it will initiate the RTS/CTS function. If the packet size is equal to...
(%) : 50 Station interference threshold :32 WMM switch : enable Mandatory switch : disable Auto-off start time : 00:00:00 Auto-off end time : 00:00:00 WiFi-light mode : signal-strength Utmost power switch : enable Rrm-profile : default Air-scan-profile : default --- AP EDCA param...
/bin/sh: can't create /proc/sys/vm/extfrag_threshold: nonexistent directory / # echo 1 > /proc/sys/vm/compact_memory /bin/sh: can't create /proc/sys/vm/compact_memory: nonexistent directory Still same error when trying to set higher FPS: ...
The impact of rts threshold on IEEE 802.11 MAC protocol Wireless technologies and applications received great attention in recent years. The medium access control (MAC) protocol is the main element that determin... ST Sheu,T Chen,J Chen,... - IEEE 被引量: 94发表: 2003年 Performance Degrada...