Through analyzing the cause of RTS/CTS handshake failure of UWB MACAW MAC,UWB-RI MAC with receiver controlled handshake was proposed. 针对常用的UWB MACAW MAC协议在网络负荷较大时RTS/CTS握手失败概率大的问题,提出了一种先由接收节点传送FI帧指示其处于空闲状态,然后发送节点再进行握手的UWB-RI MAC协议...
NEW ADAPTIVE RTS/CTS CONTROL METHOD FOR REDUCED TRANSMISSION OVERHEAD ON NETWORKS WITH HIDDEN TERMINALSIEEE802.11hidden terminaladaptive RTS/CTSThe IEEE802.11 standard uses the RTS/CTS handshake mechanism to avoid packet collisions with transmissions from hidden terminals. Although this mechanism is ...
谢谢你的回复,我用的是AccessPort这个串口助手工具,我用它配置好串口,当CP2102的USB与电脑断开再重新接入后,直接打开串口开关,利用AccessPort自身带的串口监控功能得到的参数是ControlHandShake: 0x0, FlowReplace: 0x0,而FT232和CH340相同的操作监控到的参数是ControlHandShake: 0x1, FlowReplace: 0x40。我理解应该...
not hidden from the access point. Forcing the access point to implement the RTS/CTS handshake ...
Trilateration techniques for position estimation use distances measurements in order to determine the unknown location of a mobile user. In this paper, a Time of Arrival (ToA) based method for estimating distance in an IEEE 802.11b network is presented. This method uses the RTS/CTS handshake and...
NEW ADAPTIVE RTS/CTS CONTROL METHOD FOR REDUCED TRANSMISSION OVERHEAD ON NETWORKS WITH HIDDEN TERMINALS.adaptiveRTS/CTShiddenterminalIEEE802.11The IEEE802.11 standard uses the RTS/CTS handshake mechanism to avoid packet collisions with transmissions from hidden terminals. Although this mechanism is effective...
Although RTS/CTS handshake effectively reduces packet collisions with hidden terminals, it also increases transmission overhead of IEEE802.11. In this paper, we discuss transmission overhead of IEEE802.11 induced by RTS/CTS handshake, and propose a new RTS/CTS On/Off control method for mitigating ...
If a handshake flow control of the device is configured to automatically use RTS, a client cannot clear or set RTS.A client can use an IOCTL_SERIAL_CLR_RTS request to clear RTS.Major codeIRP_MJ_DEVICE_CONTROLInput bufferNone.Input buffer lengthNone....
If the handshake flow control of the device is configured to automatically use RTS, a client cannot clear or set RTS. Major code IRP_MJ_DEVICE_CONTROL Input buffer None. Input buffer length None. Output buffer None. Output buffer length ...
NEW ADAPTIVE RTS/CTS CONTROL METHOD FOR REDUCED TRANSMISSION OVERHEAD ON NETWORKS WITH HIDDEN TERMINALS The IEEE802.11 standard uses the RTS/CTS handshake mechanism to avoid packet collisions with transmissions from hidden terminals. Although this mechanism i... T Shigeyasu,M Akimoto,H Matsuno - 《...