With the rising cost of computing hardware like Raspberry Pi's, Jaime Badillo decided to instead make use of one of a cheap old router, and set it up as an RTL-SDR server. To do this, Jaime took his old router
Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to ...
Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent SDR peripheral, and have already installed and tested rtl_tcp or work-alike on your Mac, Raspberry Pi, or other server. Note that this app requires a very high bandwid...
Unlike Android devices, Apple iOS devices can't run RTL-SDRs directly through their USB ports. However, they can still connect to another networked device such as a PC or Raspberry Pi running an rtl_tcp server. In the past we've seen two rtl_tcp clients for iOS released [1,2]. Now ...
MacOS and Linux (Debian Raspberrypi) Design Each client has its own dsp thread Each dsp thread executesFrequency Xlating FIR Filter Only RTL-SDRs are supported API Defined in theapi.h Clients can connect and send request to initiate listening: ...
Rtl-sdr仅在第一个客户端连接(即节省太阳能等)之后启动。 仅在最后一个客户端断开连接时停止 MacOS和Linux(Debian Raspberrypi) 设计 每个客户端都有自己的dsp线程 每个dsp线程都执行 用于SIMD优化 仅支持RTL-SDR 原料药 在定义 客户端可以连接并发送请求以启动侦听: center_freq-这是必需的中点...
Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to ...
Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to ...
This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app...
Looking forward to using this app as it matures. It worked right away with my Raspberry Pi RTL server. It even works OK over my VPN. Features that it definitely needs in future updates: 1) The upconverter frequency needs to allow a more exact calibration down to 1 Hz. ...