git clone https://github.com/osmocom/rtl-sdr.git cd rtl-sdr # 编译 mkdir build && cd build cmake -DINSTALL_UDEV_RULES=ON -DDETACH_KERNEL_DRIVER=ON ../ make -j8 # 安装 sudo make install sudo cp ../rtl-sdr.rules /etc/udev/rules.d/ sudo ldconfig # 添加黑名单 sudo vim /etc/mod...
rtl-sdr 1. zadig 到 https://zadig.akeo.ie/ 下载 zadig-2.8.exe 下载地址: https://github.com/pbatard/libwdi/releases/download/v1.5.0/zadig-2.8.exe 2. zadig driver Options -> List All Device 选择Bulk-In, Interface(Interface 0) -> 显示USB ID 0BDA 2838 -> 点击 Install Driver 切换驱动 ...
选择RTL2832U > 点击 install Driver 即可，其他参数不要改动，我这里应为安装过了，所以是Reinstall Driver。有的系统会自己安装一个RTL2832U的驱动，不过这些都不重要，一律替换为WinUSB驱动 至此驱动安装完毕！SDR#安装 SDR#是个绿色软件，直接解压后运行SDRSharp.exe即可。(图1)选择RTL-SDR（USB），(图2)然后...
driver_files+=['D:\\Soft\\Anaconda\\Lib\\site-packages\\rtlsdr\\libwinpthread-1.dll'] 也可以将三个驱动的路径放入系统环境变量中; 注意:顺序必须按照此顺序,不然会报错:AttributeError: function 'rtlsdr_get_device_count' not found 7.测试 没有报错。 如果没有修改源码,就会报错: Error loading li...
插入设备→双击驱动安装程序→Option→勾选List All Devices→选择如图→Install Driver我已经安装过了,所以不一样。 2.2 SDRSharp 免安装,双击打开SDRSharp.exe。进入主界面后点击左上角播放按钮就可以听到无线电噪声了。 左上角设置按钮可以像我这样设置
运行install-rtlsdr.bat, 这个批处理会从http://osmocom.org 下载运行rtl-sdr所需要的驱动 插上rtl2832 usb, 让win7自己安装好驱动 以管理员身份运行 zadig.exe , 然后从option-> list all device, 选择rtl2832, 右侧选择WinUSB, 然后点击replace driver, 这一步会将默认的电视棒驱动换成rtl-sdr的驱动 ...
Insert RTL-SDR Radio into USB Port Insert the RTL-SDR radio into an available USB port on your computer. If your operating system (OS) automatically installs a driver for the device as a DVB-T receiver, wait until the OS finishes the installation before continuing. ...
You don't need to install anything -- it runs straight on your browser. (Well, you still need to do the usual RTL-SDR driver setup, but other than that...) It supports any computers or Android phones with the Chrome, Edge, or Opera browsers. Unfortunately, it cannot run on iPhone ...
运行install-rtlsdr.bat, 这个批处理会从http://osmocom.org 下载运行rtl-sdr所需要的驱动 插上rtl2832 usb, 让win7自己安装好驱动 以管理员身份运行 zadig.exe , 然后从option-> list all device, 选择rtl2832, 右侧选择WinUSB, 然后点击replace driver, 这一步会将默认的电视棒驱动换成rtl-sdr的驱动 ...
When you plug your RTL device in for the first time,Windows may request a driver or automatically install a driver from Microsoft-this is OK as it will be replaced in the next few steps.Don't install the software on the CD that comes with the device.Download the latest version of Zadig...