1. 解释 esp32 rst:0x10 (rtcwdt_rtc_reset) 的含义和可能原因 rst:0x10 (rtcwdt_rtc_reset) 是ESP32启动日志中常见的复位原因表示。这里的 rst 表示复位(Reset),而 0x10 是复位原因的代码。rtcwdt_rtc_reset 指的是由实时时钟看门狗(RTC Watchdog Timer)触发的复位。 可能原因: 软件未按时喂狗:在设备长...
串口改为 的GPIO14/15后正常。 转:ESP32处于无限重启状态,串口消息rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT)-CSDN博客
I have developed a product that runs on the ESP32-S3 very well and is stable. However, when I attempted to save energy by replacing `delay()` with light sleep at the end of my `loop()`, the ESP32-S3 started rebooting, reporting an RTCWDT_RTC_RESET error. From my research, it see...
ESP32 重启 rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) flash read err, 1000 nodemcu ESP32 刷写 microopython 烧写的过程与ESP8266类似,同样使用了 flash_download_tools 工具进行烧写 烧写过程参照ESP8266烧写 烧写结束后 上电结果反复重启,打印如下 13:43:39.148 -> rst:0x3 (SW_...
I have developed a product that runs on the ESP32-S3 very well and is stable. However, when I attempted to save energy by replacing `delay()` with light sleep at the end of my `loop()`, the ESP32-S3 started rebooting, reporting an RTCWDT_RTC_RESET error. From my research, it see...
Re: RTCWDT_RTC_RESET on light sleep Quote PostbyCamargoF»Mon Sep 23, 2024 1:09 am Code:[Select all][Expand/Collapse] #include <esp_sleep.h> #ifndef RTC_WDT_STG_SEL_OFF # define RTC_WDT_STG_SEL_OFF 0 #endif #ifndef RTC_WDT_STG_SEL_INT ...
使用的ESP32-s3r2,使用的外部的flash。单独使用light sleep示例工程进行测试没有问题。但在station工程中添加light sleep模式,在连接到wifi并获取到IP之后,是设备进入light-sleep模式,此时esp32s3直接重启,没有进入到睡眠模式,查看重启原因为RTCWDT_RTC_RST,请问有人知道是什么原因吗?
[optional] use 32.768k crystal as rtc slow clock source, set calibration as 5000 since help says recommend >3000.If using internal RC, reset still happens randomly. connect the linux build laptop to the same router with esp32-c3 mini module, ping the station IP address indefenitely. ...
Re: RTCWDT_RTC_RESET on light sleep Quote PostbyCamargoF»Mon Sep 23, 2024 1:09 am Code:[Select all][Expand/Collapse] #include <esp_sleep.h> #ifndef RTC_WDT_STG_SEL_OFF # define RTC_WDT_STG_SEL_OFF 0 #endif #ifndef RTC_WDT_STG_SEL_INT ...
I have developed a product that runs on the ESP32-S3 very well and is stable. However, when I attempted to save energy by replacing `delay()` with light sleep at the end of my `loop()`, the ESP32-S3 started rebooting, reporting an RTCWDT_RTC_RESET error. From my research, it see...