while(1){while(Gpio_GetInputIO(STK_USER_PORT, STK_USER_PIN) == FALSE);Wdt_Feed();yuyy_...
// IIC_NAck();RTC_IIC_Stop(); //产生一个停止条件delay1ms(1);Wdt_Feed();return temp;}//...
REG_SET_BIT(RTC_CNTL_WDTFEED_REG,RTC_CNTL_WDT_FEED); // FAILED} /* * @brief Disable the RTC watchdog (RTCWDG). */ voidwatchdogEndRTCWDT(){ // rtc_wdt_disable() = line 123 of ...\Arduino15\packages\esp32\hardware\esp32\2.0.16\tools\sdk\esp32s3\include\esp_hw_support\include...
当守护线程识别到主线程没反应的时候,就会软重启来复位所有的信息。 那怎么识别呢,主要是通过看门狗提供的feed喂狗方法来实现,主线程需要定时喂狗来告诉看门狗,我还在工作呢,你继续守你的大门啊。 例如: AI检测代码解析 from machine import WDT wdt = WDT(timeout=5000) #允许狗子饿肚子5秒 wdt.feed() 1. ...
REG_SET_BIT(RTC_CNTL_WDTFEED_REG,RTC_CNTL_WDT_FEED); // FAILED} /* * @brief Disable the RTC watchdog (RTCWDG). */ voidwatchdogEndRTCWDT(){ // rtc_wdt_disable() = line 123 of ...\Arduino15\packages\esp32\hardware\esp32\2.0.16\tools\sdk\esp32s3\include\esp_hw_support\include...
REG_SET_BIT(RTC_CNTL_WDTFEED_REG,RTC_CNTL_WDT_FEED); // FAILED} /* * @brief Disable the RTC watchdog (RTCWDG). */ voidwatchdogEndRTCWDT(){ // rtc_wdt_disable() = line 123 of ...\Arduino15\packages\esp32\hardware\esp32\2.0.16\tools\sdk\esp32s3\include\esp_hw_support\include...
REG_SET_BIT(RTC_CNTL_WDTFEED_REG,RTC_CNTL_WDT_FEED); // FAILED} /* * @brief Disable the RTC watchdog (RTCWDG). */ voidwatchdogEndRTCWDT(){ // rtc_wdt_disable() = line 123 of ...\Arduino15\packages\esp32\hardware\esp32\2.0.16\tools\sdk\esp32s3\include\esp_hw_support\include...
// 设置RTC看门狗超时时间(例如,设置为10秒) ESP_ERROR_CHECK(rtc_wdt_feed()); rtc_wdt_config_t config = { .timeout = RTC_WDT_TIMEOUT_10_SEC, // 超时时间设置为10秒 .stage = RTC_WDT_STAGE0, // 看门狗阶段 }; ESP_ERROR_CHECK(rtc_wdt_init(&config)); 4. 确认是否需要针对 bo...
rtc1805芯片】寄存器写入特定的寄存器值，使芯片正常运行，不通过中断脚触发中断信号，一旦feeddog停止就会...
I am using the WDT at every second. I have a LED light on and off every second of the interrupt. However, when I use the RTC, that is in my code call RTC_Start(), the WDT interrupt is never called. However, when I don't use the RTC, the WDT works. If I wan the RTC and...