Void RTC_Configuration(void)// 实时时钟的初始化配置 { RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP,ENABLE); // 使能 APB1 外设 PWR (电源控制寄存器) BKP (备份寄存器)时钟。 PWR_BackupAccessCmd(ENABLE); // 允许访问 BKP 域 BKP_DeInit(); // 复位备份域。 #...
小熊派开发板上设计了外部晶振,切换到 Clock Configuration 页面,配置为使用外部晶振(若无法选择,检查LSE时钟是否配置为外部晶振): ②「配置预分频器」 RTC外设时钟源信号进来后经过两个预分频器,如图中红框所示: 异步预分频器(async):7bit、默认值为128,产生ck_apre时钟信号,为亚秒级计数器RTC_SSR提供时钟; 同...
printf("\r\n\n RTC not yet configured..."); RTC_Configuration(); //RTC初始化 printf("\r\n RTC configured..."); Time_Adjust(); //设置RTC 时钟参数 BKP_WriteBackupRegister(BKP_DR1, 0xA5A5); //RTC设置后,将已配置标志写入备份数据寄存器 } else { if(RCC_GetFlagStatus(RCC_FLAG_POR...
/* Set the CNF flag to enter in the Configuration Mode */ RTC->CRL |= RTC_CRL_CNF; } /** * @brief Exits from the RTC configuration mode. * @param None * @retval None */ void RTC_ExitConfigMode(void) { /* Reset the CNF flag to exit from the Configuration Mode */ RTC->CRL ...
stm32之三RTC 1.对RTC的操作必须确保前一次写操作完成后操作,所以必须通过查询RTC—CR寄存器的RTOFF状态位,只有RTOFF为1,才可以写RTC寄存器。 2.首先需要定义几个先。 #define RTCClockSource_LSE 程序: 1.RTC配置 void RTC_Configuration(void) { /* Enable PWR and BKP clocks ,打开电源 管理和备份寄存器...
In the RCC configuration, enable the crystal oscillator for both LSE and HSE. The second image shows how the clock is configured such that the RTC gets the 32.768KHz, while the rest of the system runs at 180MHz. If your controller board does not have this dedicated LSE crystal of 32.768...
/** 函数名:Time_Adjust* 描述 :时间调节* 输入 :用于读取RTC时间的结构体指针(北京时间)* 输出 :无* 调用 :外部调用*/voidTime_Adjust(structrtc_time*tm){/* RTC 配置 */RTC_Configuration();/* 等待确保上一次操作完成 */RTC_WaitForLastTask();/* 由日期计算时间戳并写入到RTC计数寄存器 */RTC_Set...
RTC_Configuration_Init(); //主循环 while(1) { ;//空命令,说明用户LED的闪烁来自于RTC中断 } } 实验步骤 解压“…\第3部分:标准库教程和实验源码\ 1 - 基础实验程序\”目录下的压缩文件“实验2-9-1: RTC中断 - 指示灯”,将解压后得到的文件夹拷贝到合适的目录,如“D\STM32F103ZET6”。
for the RTC configuration */RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);//给DR0赋值0x32F2...
#include "stm32f10x_lib.h" #include "platform_config.h" staticBoolean g_bRTCAlarm = FALSE; /*** * Function Name : RCC_Configuration * Description : Configures the different system clocks. * Input : None * Output : None * Return : None ***/...