使用以下命令设置TCP / IP设置:IP地址:192.168.1.x子网掩码:255.255.255.0 在打开“ Firmware Restoration”实用程序之前,先断开或禁用所有其他网络接口(打开时,它会查看所有可用的接口,并且如果看到的不是正在尝试升级的华硕设备,则可能会出错。打开后重新连接/重新启用它们。 打开“Firmware Restoration”实用程序 选择...
选择3，编译固件，等待一段比较长的时间，等编译完毕后，可以在上面看到firmware后面有固件的名字。第七...
ASUS RT-N56U Firmware version 3.0.0.4.378.6065 Japan only version [Please note] This version ...
The 3.xxx firmware seems to have trouble with AirPlay. My router fortunately had an older version of the firmware (1.0.1.7f) originally, so I knew it worked fine. I tried termosen's response, but to my surprise IGMP snooping was already disabled for both 2.4Ghz and 5Ghz spectrums. I ...
CONFIG_FIRMWARE_INCLUDE_XUNLEI=y(迅雷) CONFIG_FIRMWARE_INCLUDE_LRZSZ=y(lrzsz) 原项目地址: https://bitbucket.org/padavan/rt-n56u 汉化文件项目地址:https://git.oschina.net/gorden5566/padavan 源码更新介绍地址(update):http://www.right.com.cn/forum/thread-216667-1-1.html...
If you plan to build the firmware with the kernel 3.0, you must build the appropriate version of tolchain: cd /opt/rt-n56u/toolchain-mipsel sudo ./clean_sources sudo ./build_toolchain_3.0.x The result will be collected the target of toolchain /opt/rt-n56u/toolchain-mipsel/toolchain-3.0....
Just bought a RT-N56U with latest firmware, and I'm using Windows 7. I run a Synology DS212+ onsite, and a DS210j at another location. I know how to do port forwarding and I've already forwarded the needed ports to my DS212+. I have tested that other services (e.g. my mail ...
curl可选编译可执行程序 CONFIG_FIRMWARE_INCLUDE_CURL 使用了PROMETHEUS提供的部分补丁 使用了Linaro1985/padavan-ng的部分软件包 可选以下插件: scutclient CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT gdut-drcom CONFIG_FIRMWARE_INCLUDE_GDUT_DRCOM dogcom CONFIG_FIRMWARE_INCLUDE_DOGCOM minieap CONFIG_FIRMWARE_INCLUDE_MINIE...
padavanfirmware/rt-n56uPublic NotificationsYou must be signed in to change notification settings Fork4 Star6 Code Issues198 Pull requests Actions Projects Security Insights Additional navigation options New issue Open What steps will reproduce the problem? 1. Router is in default mode(router, not AP...
1. Update to the latest firmware. ⁃ Always a good idea, you can download the firmware off theAsus Website 2. Enable Telnet ⁃ You can enable telnet by going to the Administration -> System section. You can log in via telnet using the username/password you’ve got set for the web...