Default Network name (SSID): SynologyRouter Default Gateway IP: 192.168.1.1 Synology login instructions Default username: admin Synology router default password list Default subnet mask: 255.255.255.0 Default DNS server: 192.168.1.1 Note: If you are using the default settings you should change...
By default, "admin" is indicated as login name. But you can also choose another name for it .. For reasons of safety, this is also highly recommended, in order to make it more difficult to penetrate unauthorized persons. The strength of the selected password is also given as a reminder ...
I plugged everything in, but I couldn't connect using the default SSID and password. I did a hard reset. Same results. I connected my MacBook directly to the RT2600ac in an attempt to connect by IP address. The LAN ports won't give me a valid IP address, only self-assigned ...
I have seen a similar issue when using a password manager such as Lastpass. It can mistakenly auto-fill the incorrect details in the RT2600ac Internet settings page. Do you have any failover setup? I had an issue where both the Primary and Secondary Interfaces had the "Set as default ga...
Synology Router (gateway) is probably on ip 192.168.1.1 (Dlink default is 192.168.0.50 not the same ip-range).The default IP address is 192.168.0.50. Once the DAP-1665 (in Repeater or Client mode) connects to yourrouter, it will get assigned a new IP address based on your router/netwo...