Similar to RSRP , UE reported an integer value to eNodeB and its range is from 0 to 34. 3GPP has provided a table shown below, by using this table the integer value can be translated to a range of RSRP value in dB. The best value of RSRP is about -3 dB and worst value can be...
The measurement of RSRQ is defined from -3 to -19.5 dB Whereas the reporting range for RSRQ measurements have an integer value between 0 and 34. Mapping between reported and measured RSRQ values Maximum Reporting Value The maximum reportable RSRQ is based upon the assumption that only the cell ...
The reporting range of RSRQ is defined from -19.5 dB to -3 with 0.5 dB resolution RSRQ measurement report mapping (3GPP Reference: TS 36.133) Example Lets try to calculate RSRP, RSSI and RSRQ for one very simple case of one resource block with 12 sub carriers and 0.5 ms in time domain....
• For frequency range 2 (FR2), CSI-RSRP shall be measured based on the combined signal from antenna elements corresponding to a given receiver branch. CSI-RSRP is used for following. If CSI-RSRP is used for L1-RSRP, RRC_CONNECTED intra-frequency. ...
It also informs UE whether second antenna need to be used for RSRP measurement or not. SIB-5 also provides the similar information to the LTE UE. RSRP measurements are mapped to the integer numbers value range from 0 to 97 before they are included in the RRC messages. The same mapping ...
The unmanned aerial vehicle (UAV) industry is moving toward beyond visual line of sight (BVLOS) operations to unlock future internet of drones applications, including unmanned environmental monitoring and long-range delivery services. A reliable and ubiquitous mobile communication link plays a vital ...
RSRP levels for usable signal typically range from about -75 dBm close in to an LTE cell site to -120 dBm at the edge of LTE coverage.RSRP mapping 3GPP TS 36.133 V8.9.0 (2010-03)The reporting range of RSRP is defined from -140 dBm to - 44 dBm with 1 dB resolution....