make[3]: Entering directory '/root/micropython/micropython/ports/rp2/build-RPI_PICO2_W' make[3]: Entering directory '/root/micropython/micropython/ports/rp2/build-RPI_PICO2_W' make[3]: Leaving directory '/root/micropython/micropython/ports/rp2/build-RPI_PICO2_W' make[3]: Entering directo...
find new drive (e.g. calledRPI-RP2drive) exposed by the Pico board. Drag & drop (or copy) the selected firmware to this drive. The Pico will reset automaticly after the upload and after few seconds it will be ready to use by HyperHDR as a serial port device using Adalight driver. ...
My initial thought is that we should use the RF24_DRIVER var (from #676 proposal) to determine if the RF24 lib should be a STATIC or INTERFACE lib in the top level CMakeLists.txt. This would also require modifying the current how-to doc we put together for the rp2xxx branch. Its ...
typedefstructsd_sdio_if_t{// See sd_driver\SDIO\rp2040_sdio.pio for SDIO_CLK_PIN_D0_OFFSETuintCLK_gpio;// Must be (D0_gpio + SDIO_CLK_PIN_D0_OFFSET) % 32uintCMD_gpio;uintD0_gpio;// D0uintD1_gpio;// Must be D0 + 1uintD2_gpio;// Must be D0 + 2uintD3_gpio;// Must b...
# https://www.adafruit.com/product/4489 # Hardware setup: # DC motor via L9110 H-bridge driver on two PWM pins that are on their own channels # e.g., RP2040 Pico pins GP28, GP27 import time import board import pwmio from adafruit_motor import motor PWM_PIN_A = board.GP28 # ...