I did not realize it at the time but there isn't a consistent pinout between display boards. As it turns out the board I purchased did not pin out the chip-select (CS) line. The ST7789 display driver will function without a CS line, however you need to configure the...
Switch the Pinout Improving flicker 64x64 with E-line on Adafruit HAT/Bonnet CPU use Limitations Fun Controlling RGB LED display with Raspberry Pi GPIO A library to control commonly available 64x64, 32x32 or 16x32 RGB LED panels with the Raspberry Pi. Can support PWM up to 11Bit per chan...
Switch the PinoutThe Adafruit HAT/Bonnet uses this library but a modified pinout to support other features on the HAT. So they forked this library and modified the pinout there. However, that fork is ancient, so I strongly suggest to use this original library instead. You can choose the ...