[MikroTik] routing ospf> print router-id: 0.0.0.0 distribute-default: never redistribute-connected: no redistribute-static: no redistribute-rip: no [MikroTik] routing ospf> [MikroTik] routing ospf> set redistri
The configuration of the MikroTik router is as follows: [admin@MikroTik] > interface print Flags: X - disabled, D - dynamic, R - running # NAME TYPE MTU 0 R ether1 ether 1500 1 R ether2 ether 1500 [admin@MikroTik] > ip address print Flags: X - disabled, I - invalid, D - dynam...
I am trying to get rid of having to get a server for pfsense and also get a 10G switch, making it 2 things to worry about So why not get one giant mikrotik core router and connect my servers to it directly? I only have like 8 servers to connect to with dual 10 SFP+ por...
receive(v1 | v1-2 | v2; Default:v1-2)specifies RIP protocol update versions the router will be able to receive passive(yes | no; Default:no)if enabled, do not send routing packets via this interface, only receive authentication(none | simple | md5; Default:none)specifies authentication ...
According to the BGP specification, if router does not receive successiveKEEPALIVEand/orUPDATEand/orNOTIFICATIONmessages within the period specified in the Hold Time field of theOPENmessage, then the BGP connection to the peer will be closed. ...
I also tried to create a static MAC address table entry with the MAC address of Prort 3 on the Mikrotik router, but got the same error message. Could the default route going to 10.1.0.12 be the problem? Like I said, since the interfaces on both sides are directly...
PerformanceLine-Rate Router ArchitectureCrossbar System Transport PackageJuniper New Sealed Specification44.19 x 4.45 x 25.9 cm TrademarkJuniper OriginChina Data Rate448 Gbps Jumbo Frames9216 Bytes Form FactorRack-Mountable Hot-PlugYes Slot ProvidedExpansion Slot ...
WDS with Mikrotik DHCP WEC from Domain Controller failing Weird services: CDPUserSvc, Contact Data, Sync Host, User Data Access, User Data Storage on Windows Server 2016 What AppLocker rules are required to enable logon.bat and getpaths.cmd?? what are the default threshold values for Averag...
to Port 3 on the Mikrotik router/firewall, and they're both on VLAN 60 (Mikrotik is 172.16.60.2, I have VLAN 60 with an HSRP address of 172.16.60.1 and Interface IP of 172.16.60.254) that they are Directly connected interfaces and I shouldn't have to create any specific stati...
Routing table on MikroTik router can be viewed using '''ip route print '''command: [admin@MikroTik_CE1] /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable...