dtb with this one:rk322x-box.dtb Fourth step: as a test to understand if the problem is really wifi, disable it at all and, if you can, use an USB dongle for some time. About the reboot issue, recently me and @fabiobassainvestigated - again - a lot on the NAND subject. We ...
upload the device tree binary (dtb) of your device. We can understand a lot of things of the hardware from that small piece of data; and alternative is a link to the original firmware (you can do a full backup with the Multitool); dmesg and other logs (use armbianmonitor -u that au...
some photos of both sides of the board. Details of theeMMC, DDR and Wifi chips are very useful! upload the device tree binary (dtb) of your device. We can understand a lot of things of the hardware from that small piece of data; and alternative is a link to the original firmware (...
The multitool DTB is a very basic DTB that should work on all boards, it is designed to be very compatible and usually works on most boards without complaints; the only testing thing I can imagine is to disable the vdd_log and vdd_arm regulators and removing/disabling the cpu operating ...
84 85 86 87 88 89 Next Page 84 of 91 RaptorSDS Members PostedMarch 2(edited) On 3/3/2024 at 4:32 AM,jocksaid: The only thing I may think about is a flag somewhere on the filesystem that is checked by the script and avoids the real bootloader upgrade. ...
Normally the base dtb shipped with armbian should work fine with all boards out of the box. Since your board looks very similar to MXQ_V72/V73, you may also try to apply the led-conf for that board via rk322x-config, but actually you can also keep the base dtb if your board is ...