EBREAK指令与调试模式有关,通过该指令将执行流返回到调试器中,执行该指令会引发breakpoint exception。 WFI指令全称Wait For Interrupt,它会将该Hart陷入等待状态,直到有中断触发为止。在下文介绍系统启动过程时,会用到该指令陷入自旋,等待fesvr将程序代码准备好并触发中断开始执行。 特权CSR举例 上文中的mstatus就是特...
①前端服务器(FESVR)是一个运行在主机CPU上的程序,可以使用栓系串行接口(TSI)读写目标系统内存的任意部分。 ②当RISC-VCPU的FESVR加载实际的程序时,默认的引导加载程序只是在等待中断(wait-for-interrupt, WFI)指令上循环。 ③FESVR使用TSI将裸机可执行程序或第二阶段引导加载程序加载到SoC的内存中。如果在软件模拟...
mcause(Machine Exception Cause)它指示发生异常/中断的原因(类型)。 mie(Machine Interrupt Enable)它指出处理器当前屏蔽了哪些中断。 mip(Machine Interrupt Pending)它列出目前正准备处理的中断(已经到来的中断)。 mtval(Machine Trap Value)它保存了陷入(trap)的附加信息:page fault中出错的地址、发生非法指令例外...
①前端服务器(FESVR)是一个运行在主机CPU上的程序,可以使用栓系串行接口(TSI)读写目标系统内存的任意部分。 ②当RISC-V CPU的FESVR加载实际的程序时,默认的引导加载程序只是在等待中断(wait-for-interrupt, WFI)指令上循环。 ③FESVR使用TSI将裸机可执行程序或第二阶段引导加载程序加载到SoC的内存中。如果在软件模...
voidwait_for_int(intint_num){//Leave only interrupt int_num enabledenable_only_int(int_num); __wfi(); restore_interrupts(); } Run Code Online (Sandbox Code Playgroud) 考虑到 RISC-V 的特定实现,它可以以这种方式使用,但正如您从伪代码中看到的那样,它并不是那么方便。
Wait for Interrupt机制,是指将处理器内核进入休眠模式,然后等待中断唤醒处理器内核,醒来后进入相应中断的处理函数中去。如第9.1节和第9.2节所述,Wait for Interrupt机制可以直接通过WFI指令(配合mstatus.MIE域被配置为1)完成。9.4. Wait for Event机制Wait for Event机制,是指将处理器内核进入休眠模式,然后等待...
Performance Core, ProcessN22, 28HPC+ Frequency (MHz)50 Dynamic power (uW/MHz)2.42 Area (mm2)0.009 Core, ProcessN22, 28HPC+ Frequency (MHz)700 Dynamic power (uW/MHz)4.6 Area (mm2)0.013 * Base configuration, SVT 9-track library, SS corner, 0.81V, -40°C, and with I/O constraint....
Faster interrupt handling for real-time applications Complete hardware preemption support for faster response Flexible interrupt source interface for simpler SoC design Platform-Level Interrupt Controller (PLIC) Key FeaturesBenefits Implements RISC-V PLIC specification ...
Another possibility is use the flush time to other tasks, for example handle interrupts. As long the interrupt handling and, in a general way, threading requires flush the current pipelines in order to change context, by this way, match the interrupt/threading with the pipeline flush makes some...
(CAN_EVENT_TX_PRIMARY_BUF | CAN_EVENT_TX_SECONDARY_BUF))) {has_sent_out = true;}if ((flags & CAN_EVENT_ERROR) != 0) {has_error = true;}can_clear_tx_rx_flags(HPM_CAN1, flags);error_flags = can_get_error_interrupt_flags(HPM_CAN1);can_clear_error_interrupt_flags(HPM_CAN1,...