r2(config)#router ospf 1 把eigrp重分发到ospf中 r2(config-router)#redistribute eigrp 100 metric 100 % Only classful networks will be redistributed r2(config-router)#exit 五.eigrp和isis之间的路由重分发 假设R1上运行的是eigrp路由协议;R3上运行的是isis路由协议 Eigrp的度量值为带宽、延迟、可靠、负载最...
在上面的RIP汇总中,掩码的位数必须等于或大于255.255.255.0,所以在这个网络环境中不可以使用这种方法对RIP进行路由汇总。回想一下EIGRP和OSPF进行路由汇总时都会产生一条指向NULL0的汇总路由,因此,也可以借鉴这种方法对RIP进行路由汇总。先在R1中配置一条指向NULL0的汇总路由之后再向RIP进程中重分配静态路由,这样可以达到...
EIGRP ,OSPF and RIP Redistribution with frame relay and VOIPdoi:10.6084/M9.FIGSHARE.1209108.V2Vohra PulkitMishra SourabhG. Shivangi
eigRpinfinity ospF20forallexceptbgp,whichis1 bgpbgpmetricissettoigpmetricvalue one-pointRedistribution one-pointredistribution -one-way;defaultrouteorstaticroutesneeded 单点单向:默认路由或者静态路由可能需要 -two-way 单点双向:一个路由器运行两种不同的协议。比如asbR路由器。
EIGRP(外部管理距离)170 在这个实验中,R1,R4上同时运行了OSPF和RIP两个协议,并做了双向重分布。因此,路由器就要通过比较管理距离值从中进行比较选择。因此,R4选择了管理距离为110的OSPF路由而没有选择管理距离为120的RIP路由,从而造成了次优路径。 路由协议之间特性相差非常大,在重分发时若忽略了对度量值和管理距离...
Other than OSPF and BGP, when redistributing into RIP or EIGRP, the default metric if not specified, is 0, which is considered as infinity and hence not redistributed...but this does not apply to redistributing static or connected routes. In that case it has a default metric of 1, so ...
Other than OSPF and BGP, when redistributing into RIP or EIGRP, the default metric if not specified, is 0, which is considered as infinity and hence not redistributed...but this does not apply to redistributing static or connected routes. In that case it has a default metric of 1, so ...
Whenever metrics do not convert, using a default metric provides a reasonable substitute and enables the redistribution to proceed. Examples The following example shows a router in autonomous system 109 using both the RIP and the Open Shortest Path First (OSPF) routing protocols. The example ...
2.路由:路由原理;静态路由,默认路由;RIP协议,OSPF协议,EIGRP协议。 分享回复赞 hcna吧 MirYY3 HCNA认证概述4. 描述交换设备的功能和工作原理 5. 通过配置交换设备,运行STP/RSTP协议等来搭建一个高效的交换网络 6. 描述路由和路由协议的基本原理,通过配置RIP/OSPF来搭建一个高效的企业路由网络 7. 执行DHCP,FTP...
In all other cases (BGP, IS-IS, OSPF, EIGRP, connected, static), the metric set by thedefault-metriccommand is used. If a valid metric cannot be determined, then redistribution does not happen. route-policy ripred set rip-metric 5 ...