I realized what you said (pulling down GPIO0 while upload, and touch the enable pin to ground while the dots appears to "wake up" the board, and set upload parameters to DIO/40Mhz/115200 baud) and still get the error Contributor lbernstone commented Sep 10, 2019 When you say "bare ...
I've just made an AR488 GPIB interface adapter as described by WaveyDipole in the mega-thread on the subject. But rather than each connected instrument having a dedicated controller, I preferred to have a single Arduino Nano with SN7516x drivers connected by a 26 way ribbon cable, daisy ch...
If you agree, please create a pull request to https://github.com/arduino/Arduino containing the change. This was referenced Jun 28, 2015 Different circuit neeeded for automatic upload using CP210x #480 Closed Incompatibility in pin assignments between esptool and esp8266/Arduino #91 Closed...
You just need to set 3.3v on transistor "collector" (pin 3) and that will reset the board!!! zador.blood.stained Thank you very much again!!! p.s. short circuit of C301 is not working (I don't know why)... martinayotte Members Contributor/Maintainer 10 Posted July 5, 2016 Qu...