参数在pt_shell 中通过man report_timing 得到,常用参数: -from -to -through -physical 报告中有location; -path_type full_clock_e full_clock_expanded,clock path 从launch到capture; summary,报告path的start、end、slack; end,报告path 的end、path delay、required time、lack; full(defult),报告 full da...
Statisticaladjustment(统计调整): 星球有很多人问:PT rpt 里最后的有一行statistical adjustment ,这个值是怎么来的以及有什么作用?这是由于在POCV分析中,arrival和required time都包含统计的偏差(variation),path的slack corner不会是required corner和arrival corner之间的简单的差值,而是根据mean和sigma算出的值,这两者...
set_global report_timing_format {hpin incr_delay delay arrival slew load cell} report_timing -late -path_group reg2reg -net -max_paths 200 > reg2reg2.rpt
例如,如下path是unconstrained path,默认情况下是不被report的。 将timing_report_unconstrained_paths的值设置为true, 再report_timing,该path就能够被report, 如下: 将timing_report_unconstrained_paths的值设置为true后,会增加PT搜索path的运行时间。发布于 2022-12-31 11:46・IP 属地湖北 ...
report_timing时序报告解读我最初接触数字IC设计时,用的绝大部分都是S家的工具,比如DC/PT/ICC,当时学习的时候感觉report_timing的报告挺容易理解的,非常直观,如果对这个有疑问或者想知道怎么根据Timing report来判断这个Path是否好修,该如何修,可以看下面的推文:《应邀长文- DC/ICC/ICC2/PT中的report_timing报告如...
为了在两个pins之间计算出skew,在计算latency的时候,PT需要考虑到以下一些情形: 时序单元:上升沿触发还是下降沿触发;或者是高电平还是低电平触发; 约束类型:setup或者hold 时序单元在约束关系中的作用:launch或者capture 对于-to和-from,缺省其中一个,都是报出与之相连的pins的最差skew。因为对于未指定的pins,PT使用...
Power BI Report Server was first launched in June 2017 as our on-premises server product, giving customers the ability to adopt Power BI today while preserving their flexibility to move to the Power BI cloud service in the future. Since then, we’ve seen customers rapidly adopt and rollout ...
.iL ALL.:),跑完PT之后报的时序结果中的begin point和end point,在innovus中report timing之后显示unconstrain,这是什么情况 noziroH ?Li. 两者的sdc是匹配的么? .iL 是匹配的 noziroH 贴一下报告和对应的sdc约束看一下 ONIC 坛中面有做两路电机远程控制方案的吗?app一起...
星球有很多人问:PT rpt 里最后的有一行statistical adjustment ,这个值是怎么来的以及有什么作用?这是由于在POCV分析中,arrival和required time都包含统计的偏差(variation),path的slack corner不会是required corner和arrival corner之间的简单的差值,而是根据mean和sigma算出的值,这两者之间会有一个差值,这个就是stati...