The bricks in a sprung arch furnace roof are prevented from dropping during initial heat up by visually observing the roof interior and any bricks which are settling are pulled up through the roof from above by a suction cup. Mortar is then applied to the removed bricks which are then re...
Mortar is then applied to the removed bricks which are then reinserted in the roof. Used in continuous glass melting furnaces.ELLSWORTH SHAMP,DONALDV. MARTI II,DONNEWSOM,MICHAELLLONWILLIAM DAMAN,LLOYD
The bricks in a sprung arch furnace roof are prevented from dropping during initial heat up by visually observing the roof interior and any bricks which are settling are pulled up through the roof from above by a suction cup. Mortar is then applied to the removed bricks which are then re...
Mortar volume ranges from 66–72%. 5. The required paste volume in the range of 36–40% can be adopted in the concrete volume. 38% was used in the SCC mix. 6. Water/binder (w/b) ratios were finalized by performing rheological tests. The optimized binder (cementitious material) content...