It is not necessary to remove the front fascia harness, valance and grille from the front fascia assembly. Remove the ankle catcher. See Ankle Catcher (Remove and Replace). Remove the bolts (x2) that attach the crush can to the vehicle. TIp Use of the following tool(s) is recommended...
Grille - Fascia - Front (Remove and Replace) T Badge Support - Fascia - Front (Remove and Replace) Trailer Hitch - Rear Energy Absorber (Retrofit) Trim - Lower - Fascia - Rear (Remove and Replace) V Bar - Fascia - Front (Remove and Replace) Valance - Front Fascia (Remove a...
Fascia - Rear - Lower (Remove and Replace) Fascia - Rear - Upper (Remove and Replace) Foam - Bumper Beam - Front (Remove and Replace) Grille - Fascia - Front (Remove and Replace) Liner Stiffener- Front Wheel House - LH (Remove and Replace) Reinforcement - Front Fascia - LH (...
2x connectors, 24x tabs, Secure BLE connectors first then secure fascia onto vehicle, Recommended assistance Remove masking tape from LH rear quarter panel Remove masking tape from RH rear quarter panel Install rear lower diffuser bolts to body ...
Remove the push clips (x2) that attach the LH air wave duct to the cross bar beam, and then remove the duct from the HVAC assembly. Install Install the push clips (x2) that attach the LH air wave duct to the cross bar beam.