Remove two screws securing the face plate of the latch assembly on the edge of the door. The latch cylinder is attached to the plate and comes out with the plate. If the plate is stuck inside a shallow mortise, pry it out with a screwdriver. 4. Remove the Jamb Plate Remove the two ...
I think the model involves only the double door articles. To replace with the new one as shown in picture 031 and 033; as Mr. Wu found out that the length of the knob was too long and suggest 内封的是我们希望改变零件的图片; 在我们的参观期间,我们谈了此与先生。 吴在工厂。 我认为...
⬢Grasp the hotend with your hand. ⬢Use your other hand to loosen the two thumb screws. There is no need to remove them completely, a few turns are enough. ⬢Slide out the hotend assembly from the heatsink. ⬢At the same time push the hotend cables behind the heatsink out of...