aEngine at high idle retract and stall the boom cylinder and record the reading. Refer to chart for specific model. If the setting is incorrect make an adjustment at the pump setting valve. Pressures correspond to regulator setting or loadsense line relief. 引擎在高无所事事缩回并且使景气圆筒...
When sizing a relief valve for a failed regulator scenario, what is typically done to determine what the "failed" characteristic of the regulator is? I'm finding it difficult to get a vendor/manufacturer to tell me a "fail Cv" for their regulator, or even what the internal orifice diameter...
eventhough the Flare KOD is the "final vessel" but an overpressure protection device (i.e. rupture disk) would be installed across the on-off valve to ensure a clear