Reinforced Aluminium Foil Reinforced Woven Polyethylene Reflective Radiant Barrier HVAC Duct Radiant barrier products restrict the transfer of heat and water vapor between conditioned and unconditioned air spaces, leading to exceptional performance and a more comf...
Reinforced Aluminum Heat Isolation Reinforced Woven Polyethylene Fabric Insulation Aluminum foil woven fabric is designed to function as cost effective radiant barrier and vapor barrier materials in variety of places, such as commercial buildings, gyms, warehouses, su...
Type:Weather Barrier Membrane;Basic Weight:75-140gsm;Material:Polypropylene&Polyethylene;Vapor breathability:<15g/24h.m2;watertighness:W1;water resistance:300cm;Application:roof underlay/wall wrap/floor cover;sturcture:PP+PE;key words:vapor barrier membr
But ATT is very suitable as barrier additives in polymer materials because it can adsorb gas or water by virtue of its porous structure. In this study, ATT nanomaterials from natural minerals were purified and added to high-density polyethylene (HDPE) to prepare HDPE/ATT nanocomposites. The ...
Paper is widely used in the packaging sector. Water vapor barrier and water resistance properties of packaging paper need to be improved by changing the wettability of its surface with sizing agents or through coating with hydrophobic materials, such as paraffin wax, polyethylene, poly(ethylene ...
DFC-1001A is a light duty, commercial grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. It is ideall...
et al. Effect of a low-pressure plasma treatment on water vapor diffusivity and permeability of poly (ethylene-co-vinyl alcohol) and polyethylene films. Surf. Coat. Technol. 201, 868–879 (2006). Article CAS Google Scholar Jayaramudu, J., Guduri, B. R. & Rajulu, A. V. ...
The similar result was obtained with CNT/high-density polyethylene (HDPE) foam, which has 21.2 dB at low φ C of 1.66 vol%, whereas solid CNT/HDPE requires a higher CNT content of about 2.31 vol% [105]. Foamed composite greatly improves electrical conductivity than unfoamed ...
Tetrahydrofurfuryl polyethylene glycol is used to modify the GNPs and zirconium(iv) oxychloride octahydrate is used as a catalyst and to improve the dispersion stability in water and other organic solutions. Highest thermal conductivity is found at 0.1 wt% GNPs in water and can be used as ...
(2-piperazinoethyl)amine, polyethylene imines, iminobispropylamine, guanidine, melamine, N-(2-aminoethyl)-1,3-propane diamine, 3,3′-diaminobenzidine, 2,4,6-triaminopyrimidine, polyoxypropylene amines, tetrapropylenepentamine, tripropylenetetramine, N,N-bis-(6-aminohexyl)amine, N,N′-bis-(3-...