Refractive index of acetone oxime methyl etherThis chapter provides refractive index of acetone oxime methyl ether at various temperatures and wavelengths.Optical Constantsdoi:10.1007/978-3-662-49236-9_142Christian Wohlfarth
Only a small number of employable mate- rials are currently known. Thus, the selection of a TCO with an optimal refractive index for a given device is often not feasible. This leads to significant unwanted reflection losses at the TCO and its interfaces in transparent devices, such as solar ...
Refractive index increments and density increments have been measured at 307.6K for polystyrene in binary solvents of 1,2,3,4-tetrahydronaphthalene (tetral... AAA Abdel-Azim,MB Huglin - 《Polymer》 被引量: 65发表: 1983年 Obtaining Low-Frequency Spectra of Acetone Dissolved in Cyclohexane by ...
2. By syringe, inject 30 to 50 mL of solvents (in order of acetone, THF, chloroform, methanol and acetone). 3. Press PURGE every 10 seconds to on/off the purge valve while injecting those solvents. 4. As an alternative, fill the flow cell(s) with acetone and leave it overnight....
Binary systems of 1,1,2,2-tetrachloroethane with benzene, toluene, p-xylene, acetone, and cyclohexane. 1. Excess volumes, ultrasonic velocities, and adiaba... Jagan,Nath,A.,... - 《Journal of Chemical & Engineering Data》 被引量: 49发表: 1983年 Excess Molar Volumes, Relative Permittivi...
Next, the sample is allowed to cool down and the PMMA is removed with acetone and isopropanol (IPA). As chemical cleaning with organic solvents always leaves some residues, they anneal the samples as well. At this stage, they heat the samples slowly to 400˚C in a tube oven in forming...
poly(ethyl acrylate) acetone 25 546 0.1107 0.0887 0.0949 92 poly(ethyl acrylate) CCl4 25 546 0.0363 0.0148 0.0178 RIID 14 poly(ethyl acrylate) DMF 25 546 0.032 0.0275 0.0307 RIID 14 poly(ethyl acrylate) ethyl acetate 25 546 0.0916 0.0771 0.0825 RIID 14 poly(ethyl acrylate) MEK 30 488 0.088...
For isocratic work with a 64 85-102195-00:2 OPERATION normal phase column, the alcohols methanol or 2-propanol, a non- carcinogenic aromatic such as the xylenes, acetone, or an ether that is non-volatile and not a ready producer of peroxides can be used. DO NOT use ethyl ether. NOTE:...
The diffusion layer is composed of a refractive-index-matching layer of a PMMA nanostructure and metal oxide. The process of the PMMA nanostructure is as follows. First, ITO-coated glass substrates (Corning, Inc.) were immersed in acetone, methanol, and deionized water and then cleaned in an...
acetone, glycol, diethylene glycol and polyglycols. Dispersion in polyglycols which are solid at room temperature is effected by heating to above the melting point. Predispersion of the particles as a "masterbatch" in the corresponding polymer system or a resin or polymer material compatible with ...