Rail-to-rail op amps are the perfect fit for applications where the supply voltage range is low and the full dynamic range is necessary at the output
Analog Devices high speed (> 50 MHz) rail-to-rail op amps enable you to operate at lower supply voltages, swing closer to the rails, and provide wider dynamic range. Featuring a portfolio with a wide
TSV631A - Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (60uA), GBP=880kHz, small offset, single, TSV631AILT, TSV631AICT, STMicroelectronics
E. Allen, "A 1.75 V rail-to-rail CMOS op amp." Proc. of IEEE ISCAS'94, pp. 497-500, London, May 30-June 2, 1994.Abdulkerim L. Coban and Phillip E. Allen, "A 1.75V Rail-to-Rail CMOS Op-Amp," Proceedings of the IEEE International Symposium on Circuits and Systems, 1994....
输入类型: Rail to Rail 长度: 5 mm (Max) 输出类型: Rail to Rail 电源类型: Single, Dual 宽度: 4 mm (Max) 双重电源电压: +/- 3 V, +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V In—输入噪声电流密度: 0.4 pA/sqrt Hz 最大双重电源电压: +/- 18 V 最小双重电源电压: +/- 1.5...
系列: OP262 放大器类型: Rail to Rail Operational Amplifiers 高度: 1.5 mm (Max) 长度: 5 mm (Max) 输出类型: Rail to Rail 电源类型: Single 宽度: 4 mm (Max) 双重电源电压: +/- 3 V, +/- 5 V en - 输入电压噪声密度: 9.5 nV/sqrt Hz 最大双重电源电压: +/- 6 V 最小双重电源电压...
The LT1884’s low offset voltage and rail-to-rail output swing enable the circuit to function properly. The first amplifier, A1, is used to drive the negative side of the bridge to force a constant current excitation of the variable resistance element. The constant current drive results...
Datasheet TLV245x, TLV245xA: 23-uA 220-KHz Rail-to-Rail Input/Output Op Amps With ShutdownTLV2453 Other TLV2453 Use of Rail-to-Rail Operational AmplifiersTLC2274 TLV245xA PSpice 5V Supply Voltage ModelTLV2451A
Some low-voltage designs don't require Rail-to-Rail or Beyond-the-Rails inputs, but most need Rail-to-Rail output stages to maximize their dynamic performance. The structure of single-supply Rail-to-Rail output stages differs considerably from those in dual-supply operational amplifiers. ...
放大器类型 Rail to Rail Operational Amplifiers 高度 1.58 mm 输入类型 Rail to Rail 长度 8.65 mm 电源类型 Single 宽度 3.91 mm In—输入噪声电流密度 0.0007 pA/sqrt Hz 湿度敏感性 Yes 工作电源电压 2.5 V to 5.5 V PSRR - 电源抑制比 84.44 dB Vcm - 共模电压 Negative Rail - 0.2...