A roof fitting or enhancing a flat roof has a triangular support frame (4) fastened onto the roof using metal brackets (8) and other supports and covered with wooden rafters (5). The metal support frame is made of Z-profile metal strips joined with threaded fasteners or by bending. The ...
A roof fitting or enhancing a flat roof has a triangular support frame (4) fastened onto the roof using metal brackets (8) and other supports and covered with wooden rafters (5). The metal support frame is made of Z-profile metal strips joined with threaded fasteners or by bending. The ...
Roof work using flat rafter is popular in the Taiwan traditional buildings that is quite different to those using square rafter or circular rafter. Because of the regional area characteristics and the better skill of wood technical master, the flat rafters affect the load distribution on the roof...
Size: Can be produced as the size you need Thickness:1.0mm,1.2mm,1.5mm Type: Single nail and double nail and bending nail Shape: Square, Rectangle, Round, Octagonal Function: A truss connector plate is a kind of tie. Truss Plates are light gauge metal pla...
Because of the regional area characteristics and the better skill of wood technical master, the flat rafters affect the load distribution on the roof eave of wood frame that become an important feature to establish regional building family spectrum for academic study. In this paper the roof eave...
In this case, the external form of the rafter clearance 11 is the same as that of the rafter clearance 1, but a permanent magnet 44 is a flat sphere of size of 8mm or below, for example so as to be used for medical treatment of stiff shoulders. At the time, the magnets are fixed...
It may be adapted to hold purlins or laths resting on the rafters of a normal roof structure. The fastening element (1) has a flat metal bar (5) with apertures (16,17) at its ends, accommodating the ends of a circular section rod (4,7,6) bent into a U-shape. This element is ...
The roof batten fixing cleat for use when existing nails have become too eroded by rust for use, is hook shaped (6,1,2,3) and is fixed to rafters (8) by a nail through the eye (3) at one end. The cleat is roughly L-shaped with the eye at one end and a rounded part (2) ...
Independent claims are also included for the following: (1) Method for assembling a rafter roof foot; and (2) Assembly aid for assembling rafter roof feet. Preferred Features: The support section has a T-profile and rods (26) are formed on the support section and extend parallel to a ...
Independent claims are also included for the following: (1) Method for assembling a rafter roof foot; and (2) Assembly aid for assembling rafter roof feet. Preferred Features: The support section has a T-profile and rods (26) are formed on the support section and extend parallel to a ...