usage: ptp4l [options] Delay Mechanism-A Auto, starting with E2E-E E2E, delay request-response (default)-P P2P, peer delay mechanism Network Transport-2IEEE802.3-4UDP IPV4 (default)-6UDP IPV6 Time Stamping-H HARDWARE (default)-S SOFTWARE-L LEGACY HW Other Options-f [file] read configur...
-A 自动选择延迟测量机制,运行时使用E2E,但接收到peer delay request报文后自动切换到P2P。-E E2E延迟测量机制 (默认配置)-P P2P延迟测量机制-2IEEE802.3协议-4UDP/IPv4协议(默认配置)-6UDP/IPv6协议-H 硬件时间戳(默认配置)-S 软件时间戳-L Legacy硬件时间戳-f 指定配置文件,若没有指定,则使用默认配置。-...
• Network transport. 选择第2层以太网或UDP/IPv4传输层。• Delay mechanism. 在P2P或E2E延迟机制...
Delay Mechanism -A Auto, starting with E2E -E E2E, delay request-response (default) -P P2P, peer delay mechanism Network Transport -2 IEEE 802.3 -4 UDP IPV4 (default) -6 UDP IPV6 Time Stamping -H HARDWARE (default) -S SOFTWARE -L LEGACY HW Other Options -f [file] read configuration...
• Delay mechanism. 在P2P或E2E延迟机制之间进行选择。• Logging level. PTP堆栈报告的消息的详细...
0 net_sync_monitor 使能NetSync Monitor协议,该选项要求hybrid_e2e被使能。 0 unicast_listen 单播监听 0 unicast_master_table 选择用于单播发现的table id 0 unicast_req_duration 单播发现的时间,单位秒。 3600 ptp_dst_mac PTP报文发送的MAC地址 01:1B:19:00:00:00 p2p_dst_mac peer机制报文发送的MAC...
网络传输类型：选择第2层以太网或UDP/IPv4传输层。延迟机制：在P2P或E2E延迟机制之间进行选择。日志级别：设置PTP堆栈报告消息的详细程度。从时钟模式：强制设备充当从时钟设备。优先级设置：生成的Announce消息的PTP优先级1和2。域号：设置PTP域号。时钟精度定义：定义时钟的精度级别。Announce和Sync消息周期...
ptp4l [ -A | -E | -P ] [ -2 | -4 | -6 ] [ -H | -S | -L ] [ -f config ] [ -p phc-device ] [ -s ] [ -l print-level ] [ -q ] [ -v ] [ -i interface ] ...选项 -A ⾃动选择延迟机制，初始为E2E,当收到对端的delay request的时候切换到P2P.-E 选择延迟...
~]# ptp4l -h usage: ptp4l [options] Delay Mechanism -A Auto, starting with E2E -E E2E, delay request-response (default) -P P2P, peer delay mechanism 。.. 实践3-运行程序 硬件时间戳,主从模式测试主时钟: sudo ptp4l -i enp0s31f6 -m –H ...
ptp4l[35843.712]: config item enp1s0f1.p2p_dst_mac is '01:80:C2:00:00:0E'ptp4l[35843.712]: config item global.socket_priority is 0ptp4l[35843.760]: port 1 (enp1s0f1): INITIALIZING to LISTENING on INIT_COMPLETEptp4l[35843.760]: config item /var/run/ptp4l....