ptp clock source {external | ieee1588}:指定设备的时钟源,可以是外部时钟源(如GPS)或IEEE 1588(PTP)时钟源。 ptp clock priority <priority>:设置设备的PTP时钟优先级,用于决定设备在PTP网络中的角色。 ptp announce timeout <timeout>:配置PTP宣告信息超时时间,控制设备之间PTP状态的转换速度。 常用查看命令实例...
执行命令clock source ptp synchronization enableslotslot-id,使能PTP时钟参考源的时钟同步功能。 缺省情况下,未使能PTP时钟源的时钟同步功能。 执行命令clock source ptp prioritypriority-valueslotslot-id,配置时钟源的优先级。 缺省情况下,时钟源的优先级为0。 执行命令clock source ptp ssm{unk|prc|ssua|ssub|s...
<HUAWEI>system-view[HUAWEI]sysname Master[Master]clock bits-type hz-2m bits0[Master]clock source 1 priority 1 system[Master]clock manual source 1 system[Master]clock bits-type 1pps-tod in bits1[Master]ptp clock-source bits1 on 配置Master的BITS时间源属性。BITS1外接时钟源为GPS,所以time-sourc...
1.1.12 ptp clock-source ptp clock-source命令用来配置外接ToD时钟源的相关参数。 undo ptp clock-source命令用来将指定的参数恢复缺省情况。 【命令】 ptp clock-source { tod0 | tod1 } { accuracy acc-value | class class-value | time-source ts-value } undo ptp clock-source { tod0 | tod1 }...
Clock source info:显示时钟源信息,包括时钟、优先级、准确度等。 4.dis ptp interface dis ptp interface: Interface:显示PTP接口的名称。 Clock ID:显示该接口所使用的时钟ID。 Port number:显示该接口的端口号。 PTP version:显示PTP协议的版本。 PTP enable:显示PTP功能是否启用。
ptp priority clock-source local { priority1 priority1 | priority2 priority2 } 当协议标准为IEEE 1588 version 2、SMPTE ST 2059-2或AES67-2015时,时钟第一、二优先级的缺省值均为128。 当协议标准为IEEE 802.1AS时,时钟第一优先级的缺省值均为246,时钟第二优先级的缺省值均为248。 1.16 配置PTP日志功能...
The PTP clock source switching method can improve probe sensitivity of the slave clock device.康达祥徐俊饶飞
路由器#configure terminal Router(config)# ptp时钟普通域0 Router(config-ptp-clk)#clock-port SLAVE master 路由器(config-ptp-port)#transport ipv4 unicast interface 环回22 negotiation 路由器(config-ptp-port)#clock source 10.10.10.10 路由器(config-ptp-port)#end编辑...
4. 时钟源(Clock Source):PTP网络中的时钟源用于提供准确的时间参考,常见的时钟源包括GPS、原子钟和其他网络中的主时钟。节点可以根据需要选择合适的时钟源进行时钟同步。 5. 时钟步长(Clock Step):时钟步长用于指定节点在同步时钟时的调整步长,即每次调整的时间间隔。较小的步长可以提高时钟的准确性,但也会增加网络...
2.Clock Quality: a.Clock Class: It’s a non-configurable node priority value (6-255) assigned based on the frequency difference from the source. Smaller value means better class. b.Class Accuracy: The accuracy (17-31 ns) of the clock compared to the UTC time. Smaller value means better...