我已将此添加到 XFsbl_HandoffExit 函数 Xil_Out32(0xff0a0018, 0x1); Xil_Out32(0xff0a02c4, 0x1); Xil_Out32(0xff0a02c8, 0x1); Xil_Out32(0xff0a004c, 0x1); XFsbl_Printf(DEBUG_GENERAL,"Toggle GPIO \n\r"); 同时,我已启用 FSBL 调试信息: 创建启动镜像: 我已移除 FSBL 和 PMUFW,...
5.如权利要求2所述的用于服务器的测试型PSU,其特征在于,GPIO接口(10)包括第一IO端IO1,第一IO端IO1与CPLD模块(4)连接,第一IO端IO1还连接有第五电阻R5和第一开关K1,第五电阻R5的另一端与CPLD供电模块(11)连接第一开关K1的另一端接地。 6.如权利要求5所述的用于服务器的测试型PSU,其特征在于,所述第一...
HAL_GPIO_WritePin(MCU_REV_GPIO(PWR_DIRECT_GPIO_Port), MCU_REV_GPIO(PWR_DIRECT_Pin), GPIO_PIN_SET); WATCHDOG_RESET(WATCHDOG_LONG_OPERATION); delay(100); HAL_GPIO_WritePin(PWR_SSTART_GPIO_Port, PWR_SSTART_Pin, GPIO_PIN_RESET); 2 changes: 1 addition & 1 deletion 2 src/eez/modu...
&GPIO_InitStruct); uint8_t tx = 0x7F; Debug("start slave FSM"); int i; for (i = 0; i <10; i++) { auto result= HAL_UART_Transmit(&huart7, &tx, 1 1000); if (result != HAL_OK) { DebugTrace"Transmit error: %d", (int)result); break int FlashStatus = ...
本申请公开了一种GPU服务器的功耗控制方法,系统,电子设备及计算机可读存储介质,PSU的alert信号线与PCH的GPIO接口连接,该功耗控制方法包括:按预设规则获取GPIO接口的电平状态;判断电平状态是否满足降频条件;若是,通过操作系统管理软件生成降频指令,以便对CP... 程世超,王鹏 被引量: 0发表: 2020年 一种整机柜供电稳定...
Today i went to university laboratory and using controllable power supply and avometer, set value 5.0-5.10V and pluged to device via GPIO / microUSB, and measured pins its using between 4.6-5.0V... and max. 0,35A.. but problem is contiune... i dont understand.. where is problem.....
把盏**共祝 在2025-02-14 09:10:37 上传0 Bytes OctoPrintPSUControlSmart是一款智能电源控制插件,可以通过GPIO、GCODE命令或系统命令等多种方式控制你的电源。这款插件支持多种编程语言,如Python、JavaScript等,方便用户根据自己的需求进行定制。通过与OctoPrint的集成,用户可以轻松地在Arduino或其他平台上实现电源控制...
电源开关模块与CPLD模块连接,还连接有电压输出接口和备用电压输出接口;电压输出接口连接有第一电阻,备用电压输出接口连接有第二电阻;第一电阻的另一端与CPLD模块连接,第一电阻的另一端还连接有第三电阻;第二电阻的另一端与CPLD模块连接,第二电阻的另一端还连接有第四电阻;CPLD模块连接有GPIO接口,CPLD模块连接有...
The module uses a VNC2-64Q package to facilitate 38 GPIO options on 0.1” pitch header pins. A 10 bit A/D converter has also been added to offer connectivity to analogue inputs. This A/D converter can be read by the VNC2-64Q SPI host interface. For USB connectivity the module ...
What it does is simple: It mounts my card, formates it, tests it with F3 and when it succeeds the GPIO with the green LED is toggled if it fails, the GPIO with the red LED is toggled. So I don't even need 'a real computer' during development to check my SD cards regularly to...