Prusa Research insists their target audience is not the hobbyist who fell in love with the MK3, but professionals and high level enthusiasts. Those who just want the extra build volume can buy an XL with a single toolhead for $1999 semi-assembled. Toolheads can also be purchased separately...
Original Prusa XL Large-scale CoreXY 3D printer The Original Prusa XL is a large-scale CoreXY 3D printer with a build volume of 36×36×36 cm (14.17’’×14.17’’×14.17’’). Featuring an optional tool changer with up to 5 independent tool heads, automatic first layer calibration for ...
Original Prusa XL Original Prusa MK4 Build volume 360 x 360 x 360 mm | 14.17 x 14.17x 14.17 in250 x 210 x 220 mm | 9.84 x 8.3 x 8.6 in Printer KinematicsCore XYCartesian Max hotend/heatbed temp. 290 °C / 120 °C (554 °F / 248 °F) ...
Once the filament is properly dry, you should place it directly into the Prusa Pro Filament Drybox to prevent repeated moisture build-up. The volume of the UF30 chamber is 32 liters. Everything under one roof PrusaSlicer An open-source, feature-rich, frequently updated tool that contains ...
Once the filament is properly dry, you should place it directly into the Prusa Pro Filament Drybox to prevent repeated moisture build-up. The volume of the UF30 chamber is 32 liters. Everything under one roof PrusaSlicer An open-source, feature-rich, frequently updated tool that contains ...
Printer dimensions and build Q: What are the dimensions of the XL? A: At this moment (!), the dimensions are as follows: Excluding spoolholders: 504 mm / 19.8 in. (w) × 535 mm / 21 in. (h) × 660 mm / 26 in. (d)
significantly. This allows the MK4S to print faster without needing to increase acceleration rates or compromise mechanical properties. It can print Prusament PLA with a 50% increase in flow and Prusament PETG at a 44% increase. This nozzle can also be used in an unmodified MK4 and the XL...
When scaling a volume of a sinking object, PrusaSlicer incorrectly placed the model on the bed. Legend in G-code preview was not automatically switched to Color Print view when color change for MM printers was set. Z-lift was incorrectly not applied for the first travel move (#11843). ...
And if that doesn't do the trick, you can send an inquiry toinfo@prusa3d.comor through the button below. Contact us Newsletter Signup and get ourmonthlysqueeze on updates, blog, printables and much more. E-mail I would like to get a free e-book Basics of 3D printing ...
Original Prusa XL Large-scale CoreXY 3D printer The Original Prusa XL is a large-scale CoreXY 3D printer with a build volume of 36×36×36 cm (14.17’’×14.17’’×14.17’’). Featuring an optional tool changer with up to 5 independent tool heads, automatic first layer calibration for ...