My rotary nob on the display is not responsive, and the tuch screen doesn't work on confirmation page. Is there way to update the firmware using the slicer like old days? priyan.nc3 days ago Hi. Not exactly like in the old days with the USB cable, but it can also be updated by ...
With the release of our Original Prusa SL1 resin 3D printer, we’ve added masked SLA (MSLA) mode into PrusaSlicer. As far as we know,PrusaSlicer is the first high-quality open-source MSLA slicer available. While it may seem that SLA and FFF slicers are very similar, in reality, the tw...
This command generates Proportional (Kp), Integral (Ki), and Derivative (Kd) values for the hotend or bed. Send the appropriate code and wait for the output to update the firmware values.UsageM303 [ E | S | C ] ParametersE - Extruder, default E0. Use E-1 to calibrate the bed ...
I have a MK3S (bought in September, no MMU), currently at 3.9.2. Today I tried to flash the new 3.9.3 firmware, but it fails at the end of upload. For the avrdude log see below. When this happens, the mainboard seems to be stuck in a boo...
It's compatible with any modern printer based on the RepRap toolchain which is running a firmware based on Marlin, Prusa, Klipper, etc. SuperSlicer is based on PrusaSlicer by Prusa Research. PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community. See the wiki and...
Prusa's MK2 and MK3 printer firmware is running on an 8-bit Atmel microcontroller and it is based on a heavily modified legacy Marlin, while the Prusa3D Mini printer and our upcoming 3D printer models are equipped with 32 bit boards running Marlin 2 as a motion controller. Until now, Pru...
The landscape of filament-based 3D printing over the past year or so has made one thing clear: the market’s gotten a taste of speed, and what was once the domain of enthusiasts installing and configuring custom firmware is now a baseline people will increasingly expect. After all, who does...
We like to improve and our printers a long time after their initial release with both hardware and software upgrades. There is no better proof than the 5.1.0 firmware for the MINI+ which brings a number of exciting new features. First of all, we’ve added Input Shaper and Pressure Advance...
A: We achieved excellent results with our testing units 🙂 Q: Is it possible to use multiple nozzle diameters during one print? A: We’re currently evaluating the pros and cons of a multi-diameter setup, it is something that is on the slicer’s side....
But the most exciting upgrade of all was the new filament sensor. Using an optical encoder similar to what you’d find in a mouse, the Prusa i3 MK3 could detect when filament had been inserted into the extruder. This allowed the firmware to pause the print if the filament had run out,...