effect of thermal cycling on properties of soft magnetic iron-resin composite materials: c.gelinas et al. (quebec metal powders ltd, canada.) - 《Metal Powder Report》 被引量: 0发表: 1999年 Characteristics of molybdenum oxide and chromium oxide cathodes in primary and secondary organic electrolyt...
Effect of processing parameters on electrical, mechanical and magnetic properties of iron–resin soft magnetic composite. Hemmati I,Madaah Hosseini H R,Kianvash A.The correlations between processing parameters and magnetic properties of an iron-resin soft magnetic composite[J... Hemmati,I.,Hosseini,...
As-deposited Fe–Hf–C–N nanocrystalline thin films are investigated to improve soft magnetic properties by controlling both the compositions of the films and sputtering conditions, such as input power andN2partial pressure. As-deposited Fe–Hf–N thin films are also investigated for the application...
Flexible materials have brought up a new era of application-based research in stretchable electronics and wearable devices in the last decade. Tuning of magnetic properties by changing the curvature of devices has significant impact in the new generation of sensor-based technologies. In this work, ...
The Fe-Zr-C-N films exhibit better soft magnetic properties than those of the Fe-Nb-C-N films, which is considered to be due to the magnitude of the formation enthalpy关键词: amorphous magnetic materials annealing ferromagnetic materials iron alloys magnetic particles nanostructured materials ...
The fracture strength of the BGA reaches 3370 MPa . This bulk specimen undergoes a plastic strain exceeding 1%, which is the largest for such large ferromagnetic BGAs. 展开 关键词: boron alloys cobalt alloys deformation ductility ferromagnetic materials fracture toughness iron alloys magnetic ...
Measurements are reported of the loss per cycle (sinusoidal flux waveform) versus magnetizing frequency f/sub m/(0<or=f/sub m/<or=100 or 400 Hz) and peak magnetization I/sub max/, performed on 3% SiFe alloys (both grain-oriented and nonoriented), Armco iron, NiFe alloys, and amorphous...
Polycrystalline NiCuZn soft ferrites with stoichiometric iron were prepared by a novel microwave sintering method. The powders were calcined, compacted and sintered at 950 °C for 30 min in a microwave sintering furnace. X-ray diffraction patterns confirm the formation of single phase cubic spinel ...
Synthesis, Structure and Properties of Iron-Based Bulk Glass-Forming Metallic Alloys Prepared by Different Processing This article deals with the materials science and engineering of glass-forming alloys in Fe-(Nb)-(Al, Ga)-(P, C, B, Si), Fe-(Cr, Mo, Ga)-(P, C, B) and Fe-(......
These excellent soft magnetic properties are presumably due to a higher degree of structural homogeneity resulting from its high glass-forming ability. It is concluded that the good soft magnetic properties combined with high glass-forming-ability and castability of the Fe–Al–Ga–P–C–B–Si ...