According to the previous studies, the drying shrinkage development in expanded polystyrene concrete (EPSC) has been reported to be greater than that in conventional concrete, which must be considered for its application in the construction industry. It is mainly attributed to the low elastic modulus...
Flame spread in high-rise building fires has been one of the research objects in the fire field for decades. Many insulation materials, such as extruded polystyrene (XPS) and expanded polystyrene (EPS), widely applied in exterior building walls, are thermoplastic materials. These thermoplastic insul...
[1]Zhongkun Zhang, Studies on Lightweight Embankment and Composite Foundation of Highway, Doctoral Dissertation of Hohai University, 1998.4. [2]Byung Sik Chun, Development of Hyperbolic Constitutive Model for Expanded Polystyrene (EPS) Geofoam under Trixial Compression Tests, Geotextiles and Geomembran...
This is due to its closed-cell structure consisting of 98% air. This air trapped within the cells is a very poor heat conductor. Hence provides the foam with excellent thermal insulation properties. The thermal conductivity of expanded polystyrene foam of density 20 kg/m3 is 0.035 – 0.037 W...
The effect of thermal treatment on the properties of expanded polystyrene. Polym Eng Sci. 2020;60:2710–23. 10.1002/PEN.25502.Search in Google Scholar (22) BASF Neopor® – a Raw Material for Diverse Solutions; https://neopor.de/portal/load/fid1225927/Neopor_Thermal_insulation.pdf available...
This lightweight material consisted of expanded polystyrene beads, the hydraulic sand from the Yangtze River, and cement. The mechanical properties of the mixed lightweight material were determined through a series of laboratory tests, including standard Proctor tests, unconfined compression tests, ...
Understanding the effects of high temperature and thermal cycles on the mechanical properties of expanded polystyrene (EPS) foam is critical for its use in... MN Tahir,E Hamed - 《Journal of Sandwich Structures & Materials》 被引量: 0发表: 2022年 The impact of post-radiation high-temperature...
properties of building insulation materials: fiberglass insulation, expanded polystyrene insulation, foil-faced polyisocyanurate insulation, and extruded polystyrene.
Innovative materials with good thermal properties such as thermal insulation were produced, using expanded polystyrene granules (EPS) and nano-silica. Dahlan [14] used nanoparticles of silica and nanoparticles of graphene to improve the mechanical properties of concrete. Taherlou et al. [15] used ...
选用0.75~0.85的复合比,可以得到密度为0.3 ± 0.01 g/cm3,吸水率小于0.3%,适用于100米水深的固体浮力材料.In this paper, composite materials with different compounding ratios are prepared via vacu-um-assisted compression molding method using expanded polystyrene (EPS) particles as filler and epoxy resin ...