The potential to improve both strength and ductility of Zr-X binary alloys decreases in the order Fe>Nb>Cr>Sn. This work provides a basis for the selection of alloying-elements to simultaneously increase the strength and ductility.doi:10.1016/j.cocom.2017.01.001Pan, Rongjian...
The results showed that the ductility of C11b MoSi2 was increased by alloying with the elements (Al and Nb) that form a C40 structured disilicide but decreased by alloying with the elements (W) that form a C11b structured disilicide. In contrast, the effect of alloying elements on the ...
Titanium is one of the important alloying elements in the heat-resistant steel used for high-temperature components of boilers. Titanium can improve the heat resistance of steel, improve the creep resistance and high-temperature endurance strength of steel. It can improve the stability of steel in ...
Influence of alloying elements on the thermodynamic properties of titanium in molten steel. Metall. Mater. Trans. B. 38, 671-680 (2007).Yoshikawa T, Morita K. Influence of alloying ele- ments on the thermodynamic properties of titanium in molten steel[J]. Metallurgical and Materials ...
This irradiation induced redistribution of alloying elements changes the mixing enthalpy and mismatch entropy in the local area [38]. On one hand, the energy shift might have a positive effect on the nucleation. On the other hand, the mismatch influences the local stress. The nucleation of <c...
The minimum creep rate and microstructures of aged samples of Mg-Gd-Zr alloys, with and without alloying additions of Zn and/or Y, have been investigated in the present work. The creep tests were performed at 523 K (250 °C) and under 80 to 120 MPa, and the microstructures before and...
Effect of alloying elements on the microstructure and mechanical properties of nanostructured ferritic steels produced by spark plasma sintering Somayeh Pasebani,Indrajit Charit ⇑ Department of Chemical and Materials Engineering,University of Idaho,Moscow,ID 83844,USA a r t i c l e i n f o ...
This may change the magnetisation of the composition as magnetic fields have been shown to affect interfacial energy in steel19, which have similar alloying elements to CoFeCrNi–Alx. Taken together, this suggests that to maximise saturation magnetisation in this composition, heat treatment to promote...
However, the effects of alloying elements on the thermodynamic and mechanical properties of HfC under high temperature and pressure have yet to be systematically investigated. Therefore, the present work aims to systematically explore how alloying elements influence the thermodynamic characteristics, elastic...
Although many studies have been conducted on the effect of alloying elements on mechanical properties of nanocrystalline metals, controversies still exist among different researchers. Some studies show that the addition of alloying elements can improve the mechanical properties of nanocrystalline metals [[...