Thank you very much for your quick and very informative response - I realise I was assiging the same ip address to my airport card and ethernet port, without realising the error of that, amongst other things... Very useful. I have just reread your post - and have played around with ne...
Ethernet 1 has automatic configuration (Obtain an IP address automatically, DHCP) Etherent 2 has static configuration with multiple different adresses: IP_Address Mask 192.168.0.20 255.255.255.0 192.168.1.100 255.255.255.0 192.168.2.10 255.255.255.0 192.168.2.51 255.255.255.0 10.22.0.1 255.255.255.0 10.2...
Is the dhcp server supplying the ip addresses with the default gateway the same as the standby ip address ? if the users nics are set with one or the other routers interface addresses instead of the standby ip address you will get a scenario that you are describing . If you...
Set upmod_net_traceto trace the data flows between IBM HTTP Server and a particular client (IP address) that will be used to reproduce the problem. Configure mod_net_trace according tothese instructions. On theNetTracedirective, be sure to specify the IP address of the client that you'll...
With your consent, JetBrains may also use cookies and your IP address to collect individual statistics and provide you with personalized offers and ads subject to the Privacy Notice and the Terms of Use. JetBrains may use third-party services for this purpose. You can adjust or withdraw your ...
remote ipv6 peer address is should 2001:db8:4::3 and 2001:db8:5::3. Sorry, something went wrong. Copy link Trae32566commentedJun 1, 2024• edited I'm having this issue as well with around ~15 lab servers moving from 9.1 to 10.0. I can provide full configurations and troubleshooting...
TRACERT prints out an ordered list of the intermediate routers that return ICMP "Time Exceeded" messages. Using the -d option with the tracert command instructs TRACERT not to perform a DNS lookup on each IP address, so that TRACERT reports the IP address of...
seeAssociating an Elastic IP address with a running instance or network interface. If the public subnet is not set to automatically assign public IP addresses to instances deployed to it, then we recommend enabling that setting. For more information, seeModifying the public IPv4 addressing attribute...
IP Address: 11.100.1.1 Mask: 255.255.0.0 Default Gateway: 11.100.0.1 11.100.0.2 Netcard2: IP Address: 11.200.1.1 Mask: 255.255.0.0 Default Gateway: 11.200.0.1 If you want to Telnet to a workstation with an IP address of 130.20.20.100, the IP datagrams will be routed through the 11.100...
When any WINS-enabled computer starts, it registers different kinds of services with WINS. Typically, the computer has a Primary and Secondary WINS address configured in the TCP/IP setup. If the Primary WINS address doesn't respond to the registration attempts, the computer tries the Secondary ...